4. Scanning

Inserting the SA-20 STRIP FILM

ADAPTER

A plastic tray is provided with the strip-film adapter to catch film ejected from the scanner. This tray is attached to the adapter as shown below.

Cautions

Wait until the status LED glows steadily or the scanner is off before inserting or removing adapters. Do not replace adapters while the scanner is operating.

If an adapter does not slide in smoothly, remove it from the adapter slot and try again. Do not use force.

Nikon LS-2000 35 mm Film Scanner User’s Guide

23

Page 33
Image 33
Nikon LS-2000 manual Inserting the SA-20 Strip Film