Manuals / Nikon / Computer Equipment / Scanner

Nikon manual Setup, 3.1Setting up the LS-2000, Choosea location for the scanner

Models: LS-2000

1 47

Download 47 pages 52.86 Kb

Page 15

3. Setup

3. Setup

3. Setup

This chapter takes you step-by-step through the process of setting up the LS-2000 and installing Nikon Scan.

3.1Setting up the LS-2000

This section outlines the steps involved in connecting the LS-2000 to a computer. Before using your scanner, you will need to com- plete the following steps:

•select a suitable location for the scanner

•remove the transport locking screws

•connect the power and SCSI cables

•set the SCSI ID

Step 1—Choose a location for the scanner

Before connecting the LS-2000 to your computer, choose a flat, stable location for it, free from vibration and dust. Do not install your scanner where:

•it would be exposed to direct or reflected sunlight

•it would be subject to condensation or drastic changes in temperature

•it would be subject

to radio interference from other electronic devices

• the temperature exceeds 35ºC (95ºF) or falls below 10ºC (50ºF)

•other objects would block the scanner’s vents

Nikon LS-2000 35 mm Film Scanner User’s Guide

5

Image 15

Nikon manual Setup, 3.1Setting up the LS-2000, Choosea location for the scanner

Contents

Page Page LS-2000 Users Guide35 mm Film Scanner Symbol SymbolCautions Trademark InformationModifications CAUTIONSNotice for customers in Canada Notice for customers in European countriesDo not modify Safety PrecautionsKeep clean Do not disassembleWhen not using for an extended period When performing routine maintenanceDo not place foreign objects inside the scanner Nikon LS-200035 mm Film Scanner User’s Guide When transporting the scannerComply with copyright notices Cautions on certain copies and reproductionsSetup ContentsContents Parts and Accessories1. Overview 1. Overview1. Overview The chapters that follow provide a step-by-stepguide to installing your scanner and using Nikon Scan to scan 35 mm slides or strip film. The next chapter, Parts and Accessories, lists the things you should find packaged with your LS-2000and names the parts of the scanner. This is followed by “ Setup,” which guides you through the process of connecting your scanner to a computer and installing Nikon Scan. “ Scanning” outlines the steps involved in using Nikon Scan to scan slides and strip film. A separate reference section lists the controls available in Nikon Scan. We hope that you find this manual useful2.Parts and Accessories 2.Parts and Accessories2.1What’s in the Box 2.Parts and Accessories 2.2Parts of the LS-2000Step 1-Choosea location for the scanner 3. Setup3.1Setting up the LS-2000 3. Setup3. Setup When installing the scanner on its baseWhen installing the scanner on its side Step 2-Removethe transport locking screws3. Setup At voltages of AC 125V or less Step 3-Connectthe power cableSafety Precautions At voltages of more than ACDo not plug the power cord into 3. Setup3. Setup Step 4-Connectthe SCSI cableScanner last of several external devices When the scanner is the last device in the chain3. Setup Scanner only external device in chain3. Setup When the scanner is between other devicesSCSI connection checklist 3. SetupSafety Precautions Step 5-Setthe scanner’s SCSI ID 3. SetupNikon LS-200035 mm Film Scanner User’s Guide Nikon LS-200035 mm Film Scanner User’s Guide 3. Setup3. Setup 3.2Software InstallationStep 1-Reviewthe system requirements MacintoshWindows Step 2-InstallAdobe Acrobat ReaderWindows 3. SetupStep 3-InstallNikon Scan 3. SetupMacintosh from disk provided by hardware 3. SetupWindows 3. Setup MacintoshAfter turning on your computer, place the Nikon Scan CD in the CD-ROMdrive. The folder shown below will open on the desktop Step 2-StartNikon Scan 4. Scanning4. Scanning Step 1-Turnon your computerStep 3-Insertan adapter in the scanner 4. ScanningInserting the MA-20SLIDE Cautions 4. ScanningInserting the SA-20STRIP FILM 4. Scanning Step 4-InsertfilmCautions Step 5—Choosea film typeStep 6-Choosea color space 4. ScanningStep 7—Choosea thumbnail SA-20 Step 8-Performa preview scan4. Scanning Step 10-Autocontrast adjustment Step 9-Selecta crop4. Scanning 4. Scanning Step 11-Removedust and scratchesStep 13-Scanthe selected crop Step 14-Scanadditional images4. Scanning Once the scan window has been re-opened,the current slide or film strip can be previewed and a new crop selected as outlined in steps 5 through 12, or the current film can be ejected and new film inserted and previewed. To eject a slide from the slide-mountadapter, press the eject button and then pull the slide the rest of the way out with your fingers 4. ScanningAppendix Nikon Scan Controls Menus, Tabs, and Information DisplaysAppendix Nikon Scan Controls Appendix Nikon Scan Controls ButtonsAppendix Nikon Scan Controls Control DrawersThe Scan-SizeDrawer The Scanner Extras DrawerThe Curves-and-LevelsDrawer The Color-BalanceDrawerAppendix Nikon Scan Controls Color management PreferencesAppendix Nikon Scan Controls GammaEC DECLARATION OF CONFORMITY DECLARATION DE CONFORMITÉ DE LA CEEERKLÄRUNG ÜBER EG-NORMENGERECHTHEIT DECLARACIÓN DE CONFORMIDAD DE LA CEE