3. Setup
To change the scanner’s ID, turn the scanner off. Then, using a screwdriver, turn the dial on the back of the scanner to choose a new ID.
1 0 0 0 9 8MADE IN JAPANSCSI NB
Note: The LS-2000 conforms to Level 1 of the SCAM (SCSI Configured Auto-Magically) SCSI-selection standard, which allows some computers to set the scanner’s ID automatically. If your computer’s operating system supports Plug&Play and the SCSI host (computer or SCSI extension board) conforms to SCAM, the scan- ner may be automatically assigned an ID which differs from that set using the SCSI ID dial. SCAM will not assign conflicting IDs to SCSI devices.
Nikon LS-2000 35 mm Film Scanner User’s Guide | 15 |
