3.Find a station by:
• Pressing and holding the TUNING/ALBUM , or . button on the remote control
to automatically search for broadcasting stations.
4.Press the MO/ST button to switch between stereo and mono.
•In a poor reception area, select MONO for a clear,
•This applies only when listening to an FM station.
5.If you do not want to store the radio station found, go back to Step 3 and search for another station.
Otherwise:
a.Press the ¬ button.
b.Or, press the TUNING/ALBUM button on the remote control to select a program number in the PRESET mode.
c.Press the ¬ button to save the preset.
6.To store other radio frequencies, repeat Steps 3 to 5.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1.Select FM by pressing the TUNER/AUX button on the product or remote control.
2.Press the TUNING MODE button on the remote control until "PRESET" is displayed.
3.Press the 1, 2 buttons on the main unit or the TUNING/ALBUM ,, . buttons on the remote control to select a preset number.
Timer Function
Setting the Clock
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1.Press the TIMER SET button on the remote control twice. "CLOCK SET" is displayed.
2.Press the ¬ button on the remote control. The hour flashes.
•To increase the hours: TUNING/ALBUM ,
•To decrease the hours: TUNING/ALBUM .
3.When the correct hour is displayed, press the ¬ button, and then the minutes flash.
•To increase the minutes: TUNING/ALBUM ,
•To decrease the minutes: TUNING/ALBUM .
4.When the correct minute is displayed, press the ¬ button. "TIMER PLAY SET" appears in the display.
Setting the Timer
The timer enables you to set the product to switch on or off at specific times automatically.
•Before setting the timer, check that the current time is correct.
•For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
•If you no longer want the product to be switched on or off automatically, you must cancel the timer by pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1.Press the TIMER SET button until TIMER PLAY SET is displayed.
2.Press the ¬ button.
Result: ON TIME is displayed for a few seconds. You can set the timer
03 Functions
21 English
