32 | The System Options | AXIS 230 |
Allowed Ports - Check the boxes for the protocols that the user (IP address) will be allowed to use to access the camera. These can be FTP and/or HTTP. If you have particular requirements concerning which ports access will be allowed on, enter these in the Port range fields. To allow access via HTTP, the port value here must correspond to the value set on the TCP/IP Network Settings page. If this is set to some other value than 80 (the default setting), then this value must be added manually in this field. If the setting on the Network Settings page is 80, then nothing needs to be configured here.
After adding the above information click the OK button to save the changes.
Note: If accessing the AXIS 230 via a proxy server, the proxy server's IP address must 
be added to the list of allowed IP numbers.
Deleting and Modifying the Properties for Allowed IP Addresses
To delete an IP address, select it in the list and click the Remove button. To modify an address, select it from the list of allowed addresses, make the necessary changes and then click OK.
Date & Time
Click Date and Time to define the time and date settings for the AXIS 230, either manually or automatically, as described below.
Current Server Time
Shows the current date and time.
New Server Time
Time Zone - Select the time zone where the AXIS 230 is located.
Automatically adjust for daylight saving time changes - Check this box to automatically update the time changes caused by daylight saving.
Synchronize with computer time - Sets the time according to the clock on your computer.
Synchronize with NTP Server - This option will cause the AXIS 230 to update the time from an NTP server every 60 minutes. Specify the NTP server's IP address or DNS name and set the appropriate time zone for your camera’s location. Note that if using a DNS name, a DNS server must be configured in the TCP/IP settings.
Set manually - Using this option allows you to manually enter the time and date.
