Axis Communications 2 user manual Appendix F - Technical Specifications, Axis

AXIS 230 Technical Specifications 55

Appendix F - Technical Specifications

System Requirements - Windows® 2000 or Windows XP (with latest Service Pack.) AGP graphics card with 16 MB video memory and support for DirectDraw®. Use the latest available driver. Internet Explorer 5.5 or higher (with latest Service Pack.) DirectX® (latest version.)

Installation - Physical network connection using RJ-45 twisted pair cable. 10baseT or 100baseTX Fast Ethernet.

Management - Remote configuration and status using Web-based tools.

Video Features - MPEG-2 video compression. Configurable resolution, color and quality levels.

Audio In - One 3.5mm input for stereo or mono microphone, or for line-in stereo or mono signal. The logical port is selected in the web interface.

Stereo microphone input - High sens. Max:-39.0 dBu (25 mVpp)

Stereo microphone input - Low sens. Max:-18.1 dBu (270 mVpp)

Line input - Max:+2.7 dBu (3.0 Vpp)

Supported Network protocols - TCP/IP, HTTP, FTP, SMTP, NTP, ARP, DHCP, BOOTP, RTP

Terminal block connector - 2 digital inputs (max 12 V in) and 1 transistor output (max 24 V, 0.1 A). 1 pin for ground. 2 pins for RS-485 serial communication.

Pre/Post Alarm Buffer - Approximately 15 MB memory for storage of pre/post alarm video.

Serial Connector - One 9-pin D-Sub RS-232, max 115 Kbit/s.

Pan/Tilt - Pan/Tilt support via RS-232 or RS-485 for remote camera control. See www.axis.com or the online help for information about supported devices.

Security - Multi-user and multi-level password protection.

Operating Conditions: - Temp: +5o to +50o C (41o to 122o F). Humidity: 20-80% RH.

Illumination - Min illumination = 0,7 lux (at F1.4 1/60s NTSC or 1/50s PAL) (50IRE) (down to 0.01 lux, depending on shutter speed.) Recommended illumination: 100 to 100.000 lux.