Axis Communications 2 Upload Servers, Adding an Upload Server, Axis, Operating the AXIS

Models: 2

1 62
Download 62 pages 46.97 Kb
Page 25
Image 25

AXIS 230

Operating the AXIS 230

25

Send email notification to - Check this box to enable the sending of email to notify recipients of events. Enter the email address(es) in the field provided. Multiple addresses are separated by commas (,). To add your own text, check the Include text box and enter your text. Note that a mail server must be configured in the SMTP network settings.

Send HTTP notification - This method sends a notification to an HTTP server. Select the name of the server. Note that the destination server must first be configured in Notification Servers. See the following page.

Send TCP notification - This method sends a TCP/IP notification. The destination server must also first be configured in Notification Servers.

Click OK to save the event type setup.

Upload Servers

Clicking this link will open the list of FTP servers currently configured in the camera. The listing shows the name and address of the server, as well as the upload path and user name.

Adding an Upload Server

Click the Add button. This opens the Upload Server Setup dialog. The following information should then be provided for the new server.

Name - This can be any descriptive name you like.

Network address - Enter the IP address or host name of the FTP server. To use a host name, a DNS server must be specified in the TCP/IP network settings.

Upload path - Specify the path to the directory where the uploaded images will be stored. If this directory does not already exist on the FTP server, there will be an error message when uploading.

Additional information - In this field you can add extra information about the server. For example, if the saved video files can also be accessed via a UNC address (e.g. \\video\file1.mpeg), you could add text providing this address. This information will be included in email sent by events that use this server.

The user name and password you use to log on to the server.

When finished, you can test the setup by clicking the Connect button. The results of the connection test will then be displayed in a message box.

Page 25
Image 25
Axis Communications 2 user manual Upload Servers, Adding an Upload Server, Axis, Operating the AXIS