Functions
•If a microphone is connected to the product and you press the USB REC button, you activate the MP3 Recording function, not the Copy function.
•Press the USB REC button for a second to start FILE COPY. Press and hold the USB REC button for a few seconds to start
FOLDER COPY.
External Source
•"AUX RECORD" is displayed and recording starts.
CD/USB1(MP3) & MIC
•"MP3 RECORD" is displayed and recording starts.
4.To stop recording, press the 5 button. The recording is automatically saved as an MP3 file.
5.After the recording is finished, a directory named
NOTEs
✎✎ WMA/MP2 files can only be copied not recorded.
✎✎ Do not disconnect the USB device or the AC Cord during recording. You can cause file damage.
✎✎ If you disconnected the USB device during recording, the product will turn off and you will not be able to delete the file that has been recorded. If this occurs, connect the USB device to a PC, back up the USB data to the PC, and then reformat the USB device.
✎✎ If the USB device does not have enough memory, "NOT ENOUGH MEMORY" will appear on the display.
✎✎ The Recording function supports the FAT file
systems only. The NTFS file system is not supported.
✎✎ When you use the CD high speed search function, the CD recording function is unavailable.
✎✎ With some USB devices, recording time may be longer.
✎✎ In the Program mode, you can't use the recording function.
✎✎ When the Recording function is active, the EQ and GIGA SOUND functions automatically turn off and are unavailable.
✎✎ During a CD recording, the REPEAT function automatically turns off and is unavailable.
✎✎ If you use the MIC function during a CD recording, the voice from the microphone will be recorded.
✎✎ You can not record audio from the radio when searching for a station or if there are no frequencies available when the product is set to Tuner mode.
✎✎ Note that setting the input level too loud when recording music from an external device through the AUX or USB channel may introduce noise into the recording. If this occurs, lower the external device's volume level.
Recording Speed
Each time you press the REC SPEED button on the remote control, the recording speed will change as follows:
RECORD SPEED x 1 ; RECORD SPEED x 4
•When you record from the tuner or an external source, you cannot change the recording speed.
•If you select RECORD SPEED X 4, sound is not produced during the recording.
•If you connect the microphone, you have one recording speed mode available: RECORD SPEED X 1.
•During recording, if you disconnect the microphone, the recording will stop. If you reconnect the microphone, the recording will not restart.
NOTEs
✎✎ Even when RECORD SPEED x4 is set, recording may not be made in x4 speed depending on the used USB storage device.
24 English
