HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Internet Services

<srvParmTag>

<srvParmValue>

"tcpOT": integer, which indicates the duration (in seconds) to be waited for disabling a link when a TCP/IP data packet is not acknowledged.

Value range: 1–6000; default value:

6000.

10.3.3 Setting the Internet Service Profile

Write AT^SISS=<srvProfileId>,<srvParmTag><srvParmValue> command

Function Sets the value of <csrvParmTag> for the service profile whose ID is <srvProfileId> to <srvParmValue>.

Response z In case of successful execution: <CR><LF><CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT: <CR><LF>CME ERROR: <err><CR><LF>

Note:

You need to select the internet service type through the “srvType” value of <srvParmTag> before setting other values of <srvParmTag> because the value of “srvType” determines the applicability of other values (excluding the <srvParmValue-alphabet>) of <srvParmTag>. The <srvParmValue-alphabet> parameter can be set either before or after “srvType”. The settings for all parameters of the profile are changeable.

10.3.4 Examples

Example 1:

Set srvType of the service profile whose ID is 0 to Socket.

AT^SISS=0,srvType, Socket

OK

AT^SISS=0,conId,0

OK

AT^SISS=0,address,”socktcp://listener:8000”

OK

Example 2:

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

143

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 160
Image 160
Huawei MG323 manual Setting the Internet Service Profile, Examples