Huawei MG323 Sysstart Command for Unsolicitedly Reporting Module Startup, Read ATSCFG? command

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification	Commands for Configuration

2.13.2 Reading the Settings for Configuration Items

Read AT^SCFG? command

Function Reads the settings for configuration items.

Response <CR><LF>^SCFG: <str>s, <value>[,<value>[,…]] <CR><LF> [<CR><LF>^SCFG: <str>s, <value>[,<value>[,…]] <CR><LF> […]]

<CR><LF>OK<CR><LF>

2.13.3 Setting Configuration Items

Write	AT^SCFG=<str>[,<value>]
command
Function	Sets configuration items.
Response	z In case of successful execution:
	<CR><LF>^SCFG: <str>, <value><CR><LF>
	<CR><LF>OK<CR><LF>

zIn case of an error: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT: <CR><LF>+CME ERROR: <err><CR><LF>

2.14^SYSSTART – Command for Unsolicitedly Reporting Module Startup

This command indicates that the module is started, and can be operated.

If the adaptive baud rate is set (that is, AT+IPR=0), this command is not reported.

URC <CR><LF>^SYSSTART<CR><LF>

Issue 02 (2010-11-23)	Huawei Proprietary and Confidential	26
	Copyright © Huawei Technologies Co., Ltd.