HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Internet Services

10.9^SIS - Command for Unsolicitedly Reporting the Information About Internet Services

The ^SIS command (URC command) unsolicitedly reports the information about internet services. Currently, the URC cannot be disabled.

URC <CR><LF>^SIS: <srvProfileId>,<urcCause>[, [<urcInfoId>][,<urcInfoText>]]<CR><LF>

Note:

zThis response is unsolicitedly reported, which is set through the AT^SCFG command.

zWhen the server receives the socket connection of the client, the <urcInfoId> parameter in the ^SIS unsolicited reporting indicates the profileid of the service that is automatically created by the server.

Parameter description

<urcCause>: identification of URC cause.

z0: indicates an event that occurs when an internet service is enabled or being used. The event may be error, warning, information element, or note.

z1: indicates that the service whose Socket listening is enabled is receiving the connection request sent by the remote client.

z2: indicates the failure of connecting the introduced Socket service client. Since no available internet service profile exists, the request sent by the client is rejected.

<urcInfoId>: identification of information about <urcCause>.

z0: The service works properly.

z1–2000: Error; the service is interrupted; enter <srvState>=6(Down).

z2001–4000: information about service processing

z4001–6000: Warning; the service is not interrupted.

z6001–8000: Notes

<urcinfoText>: information about <urcCause>.

When the value of urcCause is 1, urcInfoId actually indicates the profile ID that is dynamically assigned by the listener to the client request.

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

155

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 172
Image 172
Huawei MG323 manual URC Crlfsis srvProfileId,urcCause, urcInfoId,urcInfoTextCRLF