Huawei MG323 manual Commands for Network Services

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification		Contents
7.16.4 +CLIP - Command for Unsolicitedly Reporting the CLI		72
7.17 RING – Command for Unsolicitedly Reporting Incoming Calls		73
7.18 +CRING – Command for Unsolicitedly Reporting Incoming Calls		73
8 Commands for Network Services		74
8.1 AT+COPN - Command for Querying the Operator Name		74
8.1.1 Checking Whether This Command Is Supported		74
8.1.2 Reading the List of Operators		75
8.1.3 Examples	...............................................................................................................................	75
8.2 AT+COPS - Command for Selecting Operators		75
8.2.1 Checking the Current Available Network and Operator Information		76
8.2.2 Reading the Currently Registered Network and Operator Information		77
8.2.3 Setting the Current Operator Information		77
8.2.4 Examples	...............................................................................................................................	77
8.3 AT+CREG - Command for Querying Network Registration		78
8.3.1 Checking the Parameter Range Supported by This Command		78
8.3.2 Querying the Current Status of Network Registration		79
8.3.3 Setting the Status of Network Registration		79
8.3.4 +CREG – Command for Unsolicitedly Reporting the Network Registration Status		80
8.3.5 Examples	...............................................................................................................................	80
8.4 AT+CSQ - Command for Querying the Signal Quality		80
8.4.1 Checking the Parameter Range Supported by This Command		81
8.4.2 Querying the Current Signal Quality		82
8.4.3 Examples	...............................................................................................................................	82
8.5 AT^SMONC - Command for Querying the Cell Information		82
8.5.1 Checking Whether This Command Is Available		83
8.5.2 Querying the Cell Information		83
8.5.3 Examples	...............................................................................................................................	84
8.6 AT^SMOND - Command for Querying the Cell Information (Including Neighbor Cells)		84
8.6.1 Checking Whether This Command Is Available		84
8.6.2 Querying the Cell Information		85
8.6.3 Examples	...............................................................................................................................	86
8.7 AT^MONI - Command for Querying the Cell Information in Idle and Dedicated Modes		86
8.7.1 Checking the Parameter Range Supported by This Command		86
8.7.2 Obtaining the Information About the Serving Cell or Dedicated Cells		89
8.7.3 Periodically Obtaining the Information About the Serving Cell or Dedicated Cells		89
8.7.4 Examples	...............................................................................................................................	90
8.8 AT^MONP - Command for Monitoring Idle Neighbor Cells		91
8.8.1 Checking the Parameter Range Supported by This Command		92
8.8.2 Obtaining the Monitoring Information About Neighbor Cells		93
8.8.3 Periodically Obtaining the Monitoring Information About Neighbor Cells		94
8.8.4 Examples	...............................................................................................................................	94
	Huawei Proprietary and Confidential
Issue 02 (2010-11-23)		v
	Copyright © Huawei Technologies Co., Ltd.