HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Network Services

712 20 -73 460 001

2 22 32

e

 

OK

 

8.9 AT^SMONG - Command for GPRS Monitoring

The AT^SMONG command performs GPRS monitoring and obtains the information about the cells that support the GPRS function. The information can be obtained by execution command and write command. The write command can be set to periodically return the cell information. To stop periodical return of the cell information, you can enter any character.

8.9.1Checking the Parameter Range Supported by This Command

Test AT^SMONG=? command

Function Returns the parameter range supported by this command.

Response z In case of successful execution:

<CR><LF>^SMONG: (list of supported <table>s),(list of supported <period>s)<CR><LF>

<CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT during command execution: <CR><LF>+CME ERROR: <err><CR><LF>

Parameter description

<period>: integer parameter. This parameter can be set to periodically return the list of cell information (in seconds).

Value range: 1–100. If the value of the <period> parameter is omitted, the returned cell information is displayed in a single line. If the value of the <period> parameter is set, 10 lines of cell information are returned periodically and each 10 lines are accompanied by a text title line.

<table>: integer, which indicates the cell information table. The value is 1.

Table 8-3List of cell information

Parameter

Description

 

 

BCCH

Absolute Frequency Channel Number (ARFCN) of the Broadcast Control

 

Channel (BCCH)

 

 

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

96

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 113
Image 113
Huawei MG323 manual Atsmong Command for Gprs Monitoring, 712 20 -73 460, Bcch