HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Short Messages

OK

Example 2:

Set the short message notification mode as follows: do not store the short message and send it directly to the TE; do not send the short message status report.

AT+CNMI=1,2,0,0,0

OK

Example 3:

Set the short message notification mode as follows: store the short message on the MT and report the storage location to the TE; do not store the short message status report and report it directly.

AT+CNMI=1,1,0,1,0

OK

Example 4:

Set the short message notification mode as follows: store the short message on the MS and report the storage location to the TE; store the short message status report on the MS and report the storage location to the TE; if the short message status report fails to be reported, the status report is discarded.

AT+CNMI=1,1,0,2,0

OK

11.9AT+CPMS - Command for Setting the Storage Location of Short Messages

The AT+CPMS command sets the storage location of short messages.

11.9.1 Checking the Storage Location of Short Messages

Test

AT+CPMS=?

command

 

Function

Checks the available storage location of short messages.

Response

z In case of successful execution:

 

<CR><LF>+CPMS: (list of supported <mem1>s),(list of supported

 

<mem2>s),(list of supported <mem3>s)<CR><LF>

 

<CR><LF>OK<CR><LF>

 

z In case of an error during command execution:

 

<CR><LF>ERROR<CR><LF>

 

z In case of an error related to the MS: <CR><LF>+CMS ERROR:

 

<err><CR><LF>

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

171

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 188
Image 188
Huawei MG323 Checking the Storage Location of Short Messages, AT+CPMS command sets the storage location of short messages