HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Configuration

2.13AT^SCFG - Extended Command for Setting Configuration Items

2.13.1Querying the Configuration Items That Can Be Set by the Module

Test AT^SCFG=? command

Function Queries the configuration items that can be set by the module.

Response <CR><LF>^SCFG: <str>s, (list of supported <value>s)<CR><LF> [<CR><LF>^SCFG: <str>s, (list of supported <value>s)<CR><LF> […]]

<CR><LF>OK<CR><LF>

Parameter description

<str>: string, which indicates the configurable items. For details, see Table 2-9.

<value>: indicates the configurable parameter values. For details, see Table 2-9.

Table 2-9List of configurable items

<str>

<value>

 

 

"PowerSaver/Mode9/Timeout"

<psm9to>

 

 

"Tcp/IRT"which is not supported currently.

<tcpIrt>

 

 

"Tcp/MR"

<tcpMr>

 

 

"Tcp/OT"

<tcpOt>

 

 

"Tcp/WithURCs"

<tcpWithUrc>

 

 

"URC/Datamode/Ringline"

<udri>

 

 

"URC/Ringline"

<uri>

 

 

<psm9to>: string, which indicates the duration of wakeup state in power saving mode 9 (the AT+CFUN command). The default value is 20, that is, 2s. The value range is as follows:

5... 36000 The value 10 indicates 1s. The time interval is 100 ms.

<tcpIrt>: string, which indicates the waiting time for initial re-connection (IRT). The default value is 3.

1...60 This parameter sets the waiting time (in seconds) before starting the initial re-connection in the stage of setting up initial TCP/IP connection.

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

24

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 41
Image 41
Huawei MG323 manual Atscfg Extended Command for Setting Configuration Items, Test ATSCFG=? command, Str Value