HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Other Commands

013

OK

Example 2:

Set the command line ending character.

ATS3=13

OK

16.3ATS4 – Command for Setting the Response Format Character

This command sets the response format character. This character is sent by the TE and is involved in the head, tail, and end tags of the result code and information response. If the S4 character in a command line is changed, the result code in this command line uses the new S4 character immediately.

16.3.1 Querying the Current Format Character

Read

ATS4?

command

 

Function

Queries the current response format character.

Response

z In case of successful execution:

 

<CR><LF><n><CR><LF><CR><LF>OK<CR><LF>

 

z In case of an error during command execution:

 

<CR><LF>ERROR:<CR><LF>

 

z In case of an error related to the MT: <CR><LF>+CME ERROR:

 

<err><CR><LF>

Parameter description

<n>: integer, which indicates the ASCII code of the response format character. Value

range: 0–127. Default value: 10.

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

206

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 223
Image 223
Huawei MG323 16.3 ATS4 Command for Setting the Response Format Character, Querying the Current Format Character, ATS4?