Huawei MG323 Commands for Internet Services, Atsics Command for Creating a Connection Profile

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification	Commands for Internet Services

10 Commands for Internet Services

Internet service, also known as IPSTACK service, means the service of using the TCP/IP protocol stack embedded in the MG323 to perform data services. The Internet service allows the host to access the Internet more easily through AT commands. This chapter describes all the AT commands that are covered by the TCP/IP protocol.

Currently, the MG323 supports Internet services for the Socket client/server of TCP and the Socket client of UDP only.

Only the URC mode is supported for Internet services.

The URC mode means that the Internet service process is driven by the URC. The URC notifies the host of whether the data can be sent or received, whether data transmission is complete, whether the service can be disabled, and whether an error occurs.

10.1AT^SICS - Command for Creating a Connection Profile

The AT^SICS command can create and edit a connection profile.

10.1.1 Checking Whether the SICS Command Is Available

Test	AT^SICS=?
command
Function	Checks whether the SICS command is available.
Response	z In case of available command: <CR><LF>OK<CR><LF>
	z In case of unavailable command:
	<CR><LF>ERROR<CR><LF>

Issue 02 (2010-11-23)	Huawei Proprietary and Confidential	135
	Copyright © Huawei Technologies Co., Ltd.