HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Call Control

7.16.2 Reading the Settings of the CLIP Service

Read

AT+CLIP?

command

 

Function

Reads the settings of the CLIP service.

Response

z In case of successful execution:<CR><LF>+CLIP:

 

<n>,<m><CR><LF>

 

<CR><LF>OK<CR><LF>

 

z In case of an error: <CR><LF>ERROR<CR><LF>

Parameter description

<m>: integer; sets whether the CLIP service is provisioned on the network.

z0: indicates that the CLIP is not provisioned.

z1: indicates that the CLIP is provisioned.

z2: unkown (due to interworking problems or limitations of originating network).

7.16.3Setting the CLIP

Write

AT+CLIP=[<n>]

command

 

Function

Enables or disables the CLIP service.

Response

z In case of successful execution: <CR><LF>OK<CR><LF>

 

z In case of an error: <CR><LF>ERROR<CR><LF>

 

z In case of an error related to the MT: <CR><LF> +CME

 

ERROR: <err><CR><LF>

Note:

AT+CLIP= is equivalent to AT+CLIP=0.

7.16.4 +CLIP - Command for Unsolicitedly Reporting the CLI

URC <CR><LF>+CLIP: <number>,<type>[,<subaddr>,<satype>[,[<alpha>][,<CLI validity>]]]<CR><LF>

Parameter description

<number>: character type, which indicates the telephone number.

<type>: integer type, which indicates the telephone number in character type.

z145: international number

z129: other number

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

72

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 89
Image 89
Huawei MG323 manual Reading the Settings of the Clip Service, Setting the Clip, Mcrlf, At+Clip?