HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Network Services

8.6.2 Querying the Cell Information

Execution AT^SMOND command

Function Obtains the cell information.

Response z In case of successful execution:

<CR><LF>^SMOND: [<sci>][,<nci>][,<TA>][,<rssiber>]<CR><LF> <CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT during command execution: <CR><LF>+CME ERROR: <err><CR><LF>

Parameter description

<sci>: serving cell information (separated by a comma, excluding CR/LF), which is described as follows: <MCC>,<MNC>,<LAC>,<cell>,<BSIC>,<chann>,<RxLev>,<RxLevFull>,<RxLev Sub>,<RxQual><RxQual Full>,<RxQual Sub>,<Timeslot>

If the serving cell information is not found, the parameter values are omitted. For example, “,,,,,,<RxLev>,,,0,,,0”

<nci>: neighbor cell information (neighbor cells 1–6) (separated by a comma, excluding CR/LF), which is described as follows:

<MCC>1,<MNC>1,<LAC>1,<cell>1,<BSIC>1,<chann>1,<RxLev>1, (these parameters repeated for neighbor cells 2 through 6 with no CR/LF): ...

<MCC>6,<MNC>6,<LAC>6,<cell>6,<BSIC>6,<chann>6,<RxLev>6; for unavailable cells, “ ,,,,,,0” is displayed.

<TA>: timing advance value of the serving cell (bits)

<rssiber>: RSSI and BER values (separated by a comma, excluding CR/LF), which are described as follows:

<RSSI>,<BER>

<MNC>: network code, which is a 2- or 3-digit decimal number.

<LAC>: location area code, which is a 4-digit hexadecimal number.

<cell>: cell code, which is a 4-digit hexadecimal number.

<BSIC>: base station identification code, which is a 2-digit decimal number.

<chann>: Absolute Frequency Channel Number (ARFCN)

<RxLev>: receive signal level (dBm)

<RsQual>: receive signal quality, which is defined in the GSM05.08.

<Timeslot>: assigned time slots (0–8). If the MS is in idle mode, time slot 0 is displayed.

<RSSI>: receive signal strength indicator (0–31).

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

85

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 102
Image 102
Huawei MG323 manual Execution Atsmond command, Rssi,Ber