Huawei MG323 Querying the Supported QoS Parameter Range, When the size of SDU is 1024 octets

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification	Commands for Data Services

9.7.1 Querying the Supported QoS Parameter Range

Test	AT+CGQMIN=?
command
Function	Queries the supported QoS parameter range.
Response	z In case of successful execution:
	[<CR><LF>+CGQMIN: <PDP_type>,(list of
	supported<precedengce>s),(list of supported <delay>s),(list of
	supported <reliability>s),(list of supported <peak>s),(list of supported
	<mean>s)<CR><LF>
	<CR><LF>OK<CR><LF>
	z In case of an error during command execution:
	<CR><LF>ERROR<CR><LF>
	z In case of an error related to the MT during command execution:
	<CR><LF>+CME ERROR: <err><CR><LF>

Parameter description

<cid>: numeric parameter, which indicates the index value of the PDP context; value

range: 1–3. For a TE-MT interface, this parameter is local and can be used for other commands related to the PDP context.

<precedence>: numeric parameter, which specifies the priority level.

z0 (default value): network customization parameter

z1: higher than priority levels 2 and 3; implements service commitments with high priority.

z2: higher than priority level 3; implements service commitments with medium priority.

z3: implements service commitments with low priority.

<delay>: numeric parameter, which indicates the delay level; value range: 0–4; this parameter defines the delay of SDU transmission on the GPRS network.

0 (default value): network customization parameter

When the size of SDU is 128 octets:

Delay Level	Average	95 Percentile
	Transmission Delay
1(Predictive)	<0.5	<1.5
2(Predictive)	<5	<25
3(Predictive)	<50	<250
4(Best Effort)	Unspecified

When the size of SDU is 1024 octets:

Issue 02 (2010-11-23)	Huawei Proprietary and Confidential	123
	Copyright © Huawei Technologies Co., Ltd.