Xerox FreeFlow manual Banner command points to note, Banner command examples, C1 Criteria

Using logical processing

BANNER command: points to note

•Field content captured via HJOBNO and HRPTNA is translated using the CODE table in effect when the record containing them is processed.

•The following table shows the effect of the TCOUNT and HCOUNT parameters of the BANNER command under the conditions listed, and the results of each.

Table 3-20. Summary of BANNER command parameter conditions and results

Condition	Parameter	Result
System positions to Top of	If TCOUNT= 0	The page after the first header is positioned at
Form after processing the		TOF.
end of the report.
	If TCOUNT not 0	The page after the last trailer is positioned at TOF.
A job is running with header	TCOUNT = 0	Job parameters such as DJDEs and page
pages only as the offset		numbering for a given report are applied to the first
criteria.		header page of the following report.
The system encounters a	TCOUNT = 0	The next banner page is treated as the first header
page other than a banner		of a new report, even if HCOUNT is not satisfied.
page.
The system encounters a	HCOUNT not 0	The system assumes that the report has fewer
non-banner page before	and	header pages than were specified and begins
HCOUNT is satisfied.	TCOUNT not 0	looking for trailer pages.

BANNER command examples

Following are examples of the BANNER command.

Example 1 The following commands define the BANNER criteria for a job with two trailer pages and one header page. A string of 120 asterisks beginning in position 1 of line 66 occurs on header and trailer pages.

T1: TABLE	CONSTANT=(120)'*';
C1: CRITERIA	CONSTANT=(0,120,EQ,T1),
	LINENUM=(66,1);
BANNER	TEST=C1, HCOUNT=1, TCOUNT=2,
	HJOBNO=(121,6);

Using LCDS Print Description Language 3-27