Xerox FreeFlow Options 54. Output Format parameter options and definitions, Default FMT1

	Specifying print format parameters
OUTPUT FEED	• “FEED = stockreference” must refer to a stock assigned to a
parameter: points	stockname by the STOCKSET command that has been
to note	specified for the report.
	• The MAIN stock is the default for system generated pages
	and is used if no SYSPAGE stock is specified.
	• The FreeFlow Print Server LCDS software comes with MAIN,
	AUX, and AUTO stocks defined.
	• If the OUTPUT FEED command and the RAUX command
	specify two different stock names, RAUX has higher priority.
	• The ‘stockname’ option bypasses the stock reference
	feature, but it still requires that the stock name be specified in
	the current STOCKSET command. (FEED=stockreference is
	the recommended usage.)
	OUTPUT FORMAT
	Specifies a page descriptor entry (PDE) to be used in formatting
	the printed output, such as location of starting print line for each
	logical page on the physical page, font usage, and orientation.
Syntax	OUTPUT FORMAT = pdeid
	NOTE: To ensure readability, enter the entire parameter
	FORMAT. Do not abbreviate to “FOR.”

Options

Table 4-54. OUTPUT FORMAT parameter options and definitions

Option	Definition
pdeid	page descriptor entry identifier
	References a page descriptor entry that was either defined previously in the
	JDL or catalogued as a separate file in the “lcds” resources folder on disk.
	Refer to “Coding a JSL” in the “PDL principles and procedures” chapter for
	information on creating and compiling PDE files using the XJDC processor.

Default FMT1

OUTPUT FORMAT Standard pdeids, such as FMT1 and FMT2, are defined in the parameter: point “PDE command” section, later in this chapter. These standard to note PDEs are delivered with the printing system software and may

be used unless a specialized PDE is required. The choice of active PDE may subsequently be replaced entirely or modified in part through DJDEs.

Using LCDS Print Description Language 4-55