Xerox FreeFlow SEFMAP=font1,font7, font5,font6,REP, Font1,font7, font5,font6, SF1FUNCTION Djde

Using Dynamic Job Descriptor Entries (DJDEs)

Example 2:

SEFMAP=((font1,font7), (font5,font6),REP);

Before the above SEF DJDE was processed, the contents of the memory font mapping table were:

((font1,font2), (font3,font4))

After this SEFMAP DJDE is processed, the contents of the memory font mapping table are:

((font1,font7), (font5,font6))

SF1FUNCTION DJDE

Specifies to the third party finisher whether or not it should perform the user defined SF1 operation on the current sheet.

The SF1FUNCTION DJDE invokes the C6 signal of the electronic interface between the printing system and a third party finishing device. The user must specify what function SF1 will have. Refer to your finishing equipment vendor documentation for more detailed information.

Type Page oriented

Syntax SF1FUNCTION = {YES NO}

Options

Table 5-55. SF1FUNCTION DJDE options and definitions

Option	Definition
YES	Instructs the third party finisher to begin the user defined SF1 operation on the
	current sheet.
NO	Instructs the third party finisher not to perform on the current sheet the
	operation defined as SF1.

5-66 Using LCDS Print Description Language