Xerox FreeFlow Volume Kanji, Volume Kcode, Volume Label, Volume Lcode, Volume Lpack, Volume Oschn

Specifying input parameters

Table 2-56. Summary of VOLUME command parameters (Continued)

Parameter	Specifies	Online	Offline	DJDE
VOLUME KANJI	Specifies double-byte character printing mode	Y	N	N
	and allows printing of data streams of
	intermixed single-byte and double-byte
	characters.
VOLUME KCODE	Specifies the double-byte character code	Y	N	N
	translation table that the system will use to
	interpret the input data.
VOLUME LABEL	Specifies the type of label on the input tape.	N	Y	N
VOLUME LCODE	Specifies the code translation table that will be	N	Y	N
	used in interpreting the tape label.
VOLUME LPACK	Specifies whether undefined labels are	N	Y	N
	packed or unpacked.
VOLUME MAXLAB	Specifies longest physical block that may be	N	Y	N
	treated as a label if the label is undefined.
VOLUME MINLAB	Specifies the shortest physical block that may	N	Y	N
	be treated as a label if the label is undefined.
VOLUME OPTIMIZE	Specifies throughput performance	Y	N	N
	enhancement.
VOLUME OSCHN	Specifies the channel that the system sill use	N	Y	N
	to signal the end of a report.
VOLUME OSHDP	Specifies the number of header banner pages	N	Y	N
	that precede the report.
VOLUME OSTLP	Specifies the number of trailer banner pages	N	Y	N
	that follow the report.
VOLUME RMULT	Specifies a multiplication factor used to	N	Y	N
	determine the true record length.
VOLUME TCODE	Specifies a set of type assignments that will	Y	Y	N
	be used for masked comparisons.
VOLUME UNPACK	Specifies unpacking method of the input data	N	Y	N
	when unpacking is required.
VOLUME VCODE	Specifies a table of character type codes to	Y	Y	N
	use for criteria testing in Value mode.

The following sections describe the syntax of the VOLUME command parameters and explain the parameter options.

Using LCDS Print Description Language 2-55