Xerox FreeFlow Options 26. Raux Test parameter options and definitions, Raux command example

Using logical processing

RAUX TEST parameter

Specifies the test expression for selection of paper from the auxiliary tray.

Syntax RAUX TEST = testexp

Options

Table 3-26. RAUX TEST parameter options and definitions

Option	Definition
testexp	test expression.
	Describes the criteria that, when detected by the system, will cause a page to
	be fed from the tray identified for the AUX stock.
	Refer to “Coding a test expression” earlier in this chapter for the format and
	syntax of a testexp.
Default		No default
		RAUX command: points to note
		• If a record that is intended to satisfy the criteria for RAUX is
		suspended by RSUSPEND, that record is not checked for the
		RAUX criteria.
		• Record selection and deletion are performed before RAUX
		processing.
		RAUX command example

Following is an example of how to use the RAUX command.

T1: TABLE CONSTANT='CUSTOMER COPY';

C1: CRITERIA CONSTANT=(20, 13, EQ, T1);

RAUX TEST=C1;

RECORD PREAMBLE=0;

3-34 Using LCDS Print Description Language