Xerox FreeFlow manual Options 50. Seffnt MAP parameter options and definitions

Specifying input parameters

Options

Table 2-50. SEFFNT MAP parameter options and definitions

Option	Definition
filename	References a font mapping file. The file is accessed when the JDL is used for
	printing.
label	References the label of a labeled SEFFNT command that is defined in the
	current JSL.
Default		No default
		SEFFNT command: points to note

Note the following when using the SEFFNT command:

•The system does not assume any mappings for fonts. You must always provide the mapping. Once the font mapping is found, range checking is based on the new orientation. The range checking determines only if the BEGIN values are within the bounds of the page. The system does not check to determine whether the line will run off the edge of the page.

•The following system pages use predefined forms and therefore are not reformatted in order to print the forms in the same orientation as their associated jobs. In other words, no font mappings or rotations of forms are performed on the following files:

–Graphic samples

–Graphic summary pages

–Accounting pages

•Short edge feed (SEF) duplex printing differs from long edge feed (LEF) applications in that SEF uses a head to toe orientation for printing portrait pages, while LEF uses head to head orientation. Refer to the “OUTPUT INVERT” parameter section of the “Specifying print format parameters” chapter for alternate methods of rotating the page orientation.

For landscape printing, however, SEF uses a head to head orientation, whereas LEF landscape uses head to toe orientation.

Using LCDS Print Description Language 2-47