Xerox FreeFlow manual Options 63. XMP Djde options and definitions, Report

Using Dynamic Job Descriptor Entries (DJDEs)

•When simplex mode is put into effect, as is done by use of the TRANS DJDE, the system ensures that the first simplex page printed after the DJDE is on an odd numbered page. To accomplish this, the system forces a blank back side for the last duplex page.

However, if you specify TRANS=NO and DUPLEX=YES, the system ensures that the first duplex page is printed on an odd numbered page.

XMP DJDE

(Xerographic Mode Persistence) Controls the xerographic mode switching between black and color printing for a report.

Type Record oriented

Syntax XMP = {DEFAULT REPORT}

Options

	Table 5-63. XMP DJDE options and definitions
Option	Definition
DEFAULT	Specifies that the xerographic mode switching that was specified at installation
	will be used for the report.
REPORT	Specifies that when the system determines that a report requires highlight color
	for a page, all subsequent pages of the report will print in highlight color.
	Auto Switch to Monochrome: On the FreeFlow Print Server-
	based DT 128/155/180 HighLight Color Printing Systems, the
	XMP feature is called Auto Switch to Monochrome and can be
	enabled and disabled in the System Preferences window under
	the Setup pull-down menu on the main GUI. When enabled, this
	feature will automatically switch the printer from Highlight Color
	Mode to Black Only Mode after a user-definable number of
	consecutive black-only pages. When enabled, it will also switch
	back to Highlight Color Mode from Black Only Mode when a
	scheduled highlight color page is to be printed. The default
	setting is Off.

Using LCDS Print Description Language 5-73