Xerox FreeFlow manual Line Baseline

Specifying print format parameters

Table 4-24. Summary of LINE command parameters (Continued)

Parameter	Specifies	Online	Offline	DJDE
LINE FDATA	Specifies starting and ending points of the file	Y	Y	N
	data within a record.
LINE FONTINDEX	Specifies that a field within the user portion of	Y	Y	Y
	the record defines the index to a specific font to
	be used for that line.
LINE GDATA	Specifies starting and ending points of graphic	N	Y	N
	data within a record.
LINE INKINDEX	Specifies a field within a data record that	Y	Y	Y
	contains a number that represents the ink index
	in the current ILIST.
LINE LPI	Specifies the line spacing values for each line	Y	N	Y
LINE MARGIN	Defines the size of the left margin on a physical	Y	Y	Y
	page
LINE OVERPRINT	Specifies the manner in which overprint lines	Y	Y	Y
	are handled.
LINE PCC	Specifies the location of the printer carriage	N	Y	N
	control field.
LINE PCCTYPE	Specifies a set of printer carriage control codes	N	N	N
	that will be used for a job.
LINE VFU	Specifies a vertical format unit table that will be	Y	Y	N
	used for a job.

The following sections describe the syntax of the command parameters and explain their options.

LINE BASELINE

Defines how to calculate the baseline position of the character that is being printed.

Syntax LINE BASELINE = {TOP CENTER BOTTOM LARGE[ST]}

4-24 Using LCDS Print Description Language