Xerox FreeFlow manual Iden command example, Oprinfo=Yes, Djpcc=Ignore, Kcode command

Specifying input parameters

IDEN command example

IDEN	PREFIX=’RTEST’, SKIP=9, OFFSET=3,
	OPRINFO=YES, DJPCC=IGNORE;

KCODE command

Defines a double-byte character code translation table.

When you require a user defined translation table of double-byte character codes, you define the double-byte character translation using the KCODE command, then reference this command using the VOLUME KCODE parameter. As an alternative, you can use the USER option of the VOLUME KCODE parameter to reference the KC ODE command for which no identifier was provided.

ac identifier A command identifier of the type ac is optional for the first KCODE command within a JDE. Thereafter, each additional KCODE command must include the identifier. The ac identifier consists of 1 to 6 alphanumeric characters (A through Z and 0 through 9). One of the characters must be alphabetic.

KCODE command parameters

The following table summarizes the KCODE command parameters.

Table 2-28. Summary of KCODE command parameters

Parameter	Specifies	Online	Offline	DJDE
KCODE ASSIGN	Defines user double-byte code assignments.	Y	N	N
KCODE	Specifies a base code from which double-byte	Y	N	N
DEFAULT	character code assignment exceptions can be
	made.

The following sections describe the syntax of the KC ODE command parameters and explain the parameter options.

2-28 Using LCDS Print Description Language