Xerox FreeFlow manual Output command point to note, Output command examples

Specifying print format parameters

OUTPUT XSHIFT Following is an example of the OUTPUT XSHIFT parameter. parameter

example

INVPDE:	PDE	PMODE=PORTRAIT, BEGIN=(1.3,.37),
		FONTS=P0612A;
INVJDE:	JDE;
	OUTPUT	INVERT=BACK, SHIFT=YES, XSHIFT=40,
		FORMAT=INVPDE,PAPERSIZE=(8.5,11);

OUTPUT command: point to note

Certain parameters of the OUTPUT command interact with each other or with other commands. Some parameters require certain options to be specified in conjunction with other options; other parameters preclude the use of certain options. The following sections describe instances in which the OUTPUT command parameters affect each other as well as other commands, and what requirements exist under those circumstances.

Some specifications that are selectable from the user interface may override the JSL specifications.

OUTPUT command examples

This section shows some examples of the use of some OUTPUT command parameters.

Example 1

OUTPUT GRAPHICS=YES, UNITS=150,

CYCLEFORMS=NONE, FORMAT=PDE1,

RESOLUTION=300;

Example 2

OUTPUT COPIES=3, DUPLEX=YES, SHIFT=YES,

OFFSET=FIRST, NUMBER=(1,66,132),

COVER=(FRONT,SEP), FORMS=GBAR;

Pages printed with the OUTPUT command shown above are duplex with a margin shift of 75 dots. Three copies of the report are made, the first of which is offset; the second and third copies are stacked on top of the first. Each page is numbered at the end of line 66. The form GBAR appears on each data page of the report.

Using LCDS Print Description Language 4-91