Xerox FreeFlow manual Rfeed command, Rfeed Test parameter

Using logical processing

Figure 3-4. Illustration of RDELETE command usage

1.Tape mark, followed by interblock gap (IBG)

2.Block 1, followed by interblock gap (IBG)

3.Block 2, followed by interblock gap (IBG)

4.Tape mark

5.Record length field (in preamble)

6.Printer carriage control (PCC) byte (at start of user portion of record)

7.Print line

8.103 bytes of data

RFEED command

The logical processing RFEED command allows you to change stock names on a page by page basis without using DJDEs. The RFEED command allows you to specify paper fed from trays assigned to different stocks if certain record criteria are met. RFEED, an extension of the RAUX command, lets you specify virtually any stock name or stock reference without being limited to the AUX stock.

The following section describes the syntax of the RFEED command parameter and explains its options.

RFEED TEST parameter

Allows you to specify paper fed from trays assigned to different stocks if certain record criteria are met.

Syntax RFEED TEST = ((testexp, stock) [, ...])

Using LCDS Print Description Language 3-37