Xerox FreeFlow manual Options 25. Line Baseline parameter options and definitions, Line Blanktype

Specifying print format parameters

Options

Table 4-25. LINE BASELINE parameter options and definitions

Option	Definition
TOP	Determines the baseline position from the top of each line by using the
	BASELINE parameter of the first font in the PDE font list.
CENTER	Positions all of the characters so that their center lines match.
BOTTOM	Determines the baseline from the bottom of each line by using the
	BASELINE parameter of the first font in the PDE font list.
LARGE[ST]	Determines the baseline position and the line spacing by using the largest
	font in the PDE font list.

Default LARGE[ST]

LINE BASELINE If KANJI is specified as one of the fonts (KANJI = YES), a parameter: point BASELINE=LARGE command is treated as BASELINE=TOP.

to note

LINE BLANKTYPE

Specifies whether or not the “shift in” and “shift out” function codes are printed as spaces.

Syntax LINE BLANKTYPE = {F V SPACE NOSPACE}

Options

Table 4-26. LINE BLANKTYPE parameter options and definitions

Option Definition

FSpecifies the width of the back space character that is associated with the width of the full-sized single-byte character, or of the half-sized double-byte character.

VSpecifies the width of the back space character that is associated with the full- sized single-byte or double-byte character.

SPACE	Replaces X’0E’ and X’0F’ (“shift-in” and “shift-out”) function codes with single-
	byte blank character spaces.
NOSPACE	Specifies that no space code is substituted.

Default NOSPACE

Using LCDS Print Description Language 4-25