Specifying print format parameters4-44 Using LCDS Print Description Language
OUTPUT GRAPHICS Specifies if and how graphics are used in the
job.
YYN
OUTPUT IDFAULT Specifies the default ink that will be used for
parameters in which no ink is specified.
YYY
OUTPUT IDR Specifies the name of an ink descriptor (IDR)
that will be used for the job.
YYY
OUTPUT IMAGE Specifies initial scaling and positioning for
Batch mode graphics.
YYY
OUTPUT INVERT Rotates an image 180 degrees on the printed
page.
YYY
OUTPUT IRESULT Specifies whether the result of overlapping
pixels will be a colored or a black pixel.
YYY
OUTPUT LOGO Enables selection and positioning of a logo. Y Y Y
OUTPUT MODIFY Associates copy modification entries with
report copies.
YYY
OUTPUT NTO1 Specifies on a report basis whether the pages
of all copies of a report are printed in
ascending (1 to N) or descending (N to 1)
order.
YYY
OUTPUT NUMBER Specifies whether page numbers will be
printed and, if so, defines their location and
appearance.
YYY
OUTPUT OFFSET Specifies whether reports are offset in the
stacker.
YYN
OUTPUT OSTK Specifies the job will be printed on ordered
stock.
YYN
OUTPUT PAPERSIZE Specifies the size paper to be used for the job. Y Y N
OUTPUT PURGE Specifies the default disposition of document
interleaved graphics after printing.
YYN
OUTPUT SF1FUNCTION Specifies a function for sheet finisher function
number 1.
YYY
OUTPUT SF2FUNCTION Specifies a function for sheet finisher function
number 2.
YYY
OUTPUT SHIFT Shifts image on the y axis (vertically) on the
page.
YYY
OUTPUT SIZING Controls matching the paper that is specified
when the page is formatted with the paper
sizes in the trays.
YYY
Table 4-42. Summary of OUTPUT command parameters (Continued)
Parameter Specifies Online Offline DJDE