Xerox FreeFlow manual Options 56. SF2FUNCTION Djde options and definitions, Shift Djde

Using Dynamic Job Descriptor Entries (DJDEs)

SF2FUNCTION DJDE

Specifies to the third party finisher whether or not it should perform the user defined SF2 operation on the current sheet.

SF2FUNCTION invokes the C7 signal of the electronic interface between printing system and a third party finishing device. Refer to your finishing equipment vendor device documentation for more detailed information.

Type Page oriented

Syntax SF2FUNCTION = {YES NO}

Options

Table 5-56. SF2FUNCTION DJDE options and definitions

Option	Definition
YES	Instructs the finisher to begin the operation defined as SF2 on the current
	sheet.
NO	Instructs the third party finisher not to perform on the current sheet the
	operation defined as SF2.

SHIFT DJDE

Shifts the printed image from the edge of the physical page. This DJDE is commonly used to accommodate hole drilling or binding.

Type Page oriented

Syntax SHIFT = {YES NO (v1, v2)}

Using LCDS Print Description Language 5-67