Xerox FreeFlow manual Shift Djde options and definitions, Shift Djde points to note, Side Djde

Using Dynamic Job Descriptor Entries (DJDEs)

Options

	Table 5-57. SHIFT DJDE options and definitions
Option	Definition
v1	value 1
	An integer value in dots for the amount of shift on the simplex page or the odd
	(front) side of the duplex page. (Each dot is 1/300 of an inch.)
	The range for v1 is –75 to 75.
v2	value 2
	A value in dots for the amount of shift on the even (back) side of a duplex page.
	The range for v2 is –75 to 75.
YES	Specifies that a shift occurs. A standard size shift occurs if YES is specified
	(v1=75 and v2= 75).
NO	Specifies that no shift occurs (v1=0 and v2=0).

SHIFT DJDE: points to note

• The SHIFT DJDE takes effect at the next physical page boundary.

• The resolution for both v1 and v2 is 1/300 of an inch for all printers.

• If the origin of a print line falls off the page, the printing system prints as much of the line as possible.

• Graphics and logos are not allowed to start off the page. If they are positioned at a point that is off the page, an error message is displayed.

SIDE DJDE

Specifies repositioning of the next logical page so that it is the first logical page on the given side of a physical sheet.

Type Page oriented

Syntax SIDE = {sideopt offsetopt (sideopt, offsetopt)}

5-68 Using LCDS Print Description Language