Using Dynamic Job Descriptor Entries (DJDEs)

XSHIFT DJDE

Specifies whether the image of the form and data on a page is to be shifted, and if so, by what values. This DJDE shifts the data downward (in the x direction) for short edge binding, because a long edge feed page is viewed in portrait mode. It is typically used to accommodate top drilled paper, binding, finishing, and edgemarking.

Type Page oriented

Syntax XSHIFT = {YES NO (v1, v2)}

Options

 

Table 5-64. XSHIFT DJDE options and definitions

 

 

Option

Definition

 

 

 

 

v1

value 1

 

An integer value in dots for the amount of shift on the simplex page or the odd

 

(front) side of the duplex page. (Each dot is 1/300 of an inch.)

 

The range for v1 is –75 to 75.

v2

value 2

 

A value in dots for the amount of shift on the even (back) side of a duplex page.

 

The range for v2 is –75 to 75.

YES

Specifies that a shift occurs. A standard size shift occurs if YES is specified

 

(v1=75 and v2= 75).

NO

Specifies that no shift occurs (v1=0 and v2=0).

5-74

Using LCDS Print Description Language

Page 428
Image 428
Xerox FreeFlow manual Xshift Djde options and definitions