Xerox FreeFlow Line Overprint parameter example, DATA=1,132, PCCTYPE=ANSI, PCC=0,NOTRAN, Line PCC

Specifying print format parameters

LINE OVERPRINT parameter example

Following is an example of the LINE OVERPRINT parameter.

LINE	OVERPRINT=(MERGE,NODISP), VFU=V1,
	DATA=(1,132), PCCTYPE=ANSI,
	PCC=(0,NOTRAN);

LINE PCC

Specifies the position (and possible translation) of the printer carriage control field.

NOTE: The PCC parameter is ignored in online printing by the FreeFlow Print Server LCDS systems, because online carriage control is derived from commands that are sent using the online channel protocol. However, you may create a JSL containing this parameter and transfer it to another laser printing system for use with offline printing.

Syntax LINE PCC = (offset [, transtype])

Options

Table 4-36. LINE PCC parameter options and definitions

Option	Definition
offset	A number specifying the byte offset of the user portion of the record within the
	user portion of each record to the printer carriage control (PCC) field.
	The default offset value is 0.
transtype	translation type.
	Specifies whether or not the printer carriage control byte is to undergo code
	translation.
	This option has the following alternatives:
	• TRAN: Indicates that the byte is to be translated into standard EBCDIC
	before being applied, using the translation defined in the CODE parameter
	of the VOLUME command.
	• NOTRAN: Prohibits translation.
	The transtype default is NOTRAN.

Default (0, NOTRAN)

4-34 Using LCDS Print Description Language