Xerox FreeFlow manual Options 22. Gdata Djde options and definitions, File Djde

Using Dynamic Job Descriptor Entries (DJDEs)

Options

	Table 5-22. GDATA DJDE options and definitions
Option	Definition
offset	The starting point within the record of the file data that will be downloaded.

termination The terminating byte of the record. The options are:

•DEFAULT

–If online, a single terminating byte exists.

–If offline, no terminating byte exists.

•n: The number of terminating bytes that exist

FILE DJDE

Enables you to load files to the system disks while a print job is in progress. The print job may be invoked solely for the purpose of downloading permanent files. (Although intended primarily for use with online systems, this DJDE is not restricted to online use.)

Type Record oriented

Syntax FILE = ([filename] [[, filetype] [[, f] [[, s] [[, n]]]])

Options

	Table 5-23. FILE DJDE options and definitions
Option	Definition
filename	A 1 to 6 character name used to identify the downloading file.
	In this option, lowercase characters a through z are converted to
	uppercase before use.
filetype	A 3 character file extension identifier, indicating the type of file being
	downloaded.
	In this option, lowercase characters a through z are converted to
	uppercase before use.
f	File input format parameter. The only parameter that is supported for the
	DP 2000 Series EPS is as follows:
	L = LPS labeled tape format
	The default file input format is L.
s	One of the following file storage parameters:
	• D = Delete after report printed
	• P = Permanent
	The default file storage is P.

5-28 Using LCDS Print Description Language