Xerox FreeFlow manual Rfeed Test parameter options and definitions, Rfeed command points to note

Using logical processing

Options

Table 3-28. RFEED TEST parameter options and definitions
Option	Definition
testexp	References a criteria table to be used to test for conditions that will cause the
	stock defined by the stock parameter option to feed for the next page.
	Refer to “Coding a test expression” earlier in this chapter for the format and
	syntax of a testexp.
stock	Defines the stock whose assigned tray(s) will be used for the page, (either a
	stock name or a stock reference).
Default		No default
		RFEED command: points to note

• Satisfaction of the RFEED criteria causes the current page to feed from the tray assigned to the stock defined in the RFEED command.

• If a criterion is met, the stock name remains in effect until the next RFEED criterion are met or a new report is processed.

• RFEED is not available as a DJDE. Instead, the FEED DJDE is available for similar functions. Refer to the “FEED DJDE” in the “Using Dynamic Job Descriptor Entries (DJDEs)” chapter of this guide.

• In a multiple RFEED criteria command, the order in which the test expressions are specified makes a difference in the job application. After a test is satisfied, the system ignores RFEED checking for the rest of the page. RFEED checking resumes when a page transition occurs.

Consider the following example:

3-38 Using LCDS Print Description Language