Xerox FreeFlow Options 80. Output Units parameter options and definitions, Output Xshift, Size

Specifying print format parameters

Options

Table 4-80. OUTPUT UNITS parameter options and definitions

	Option		Definition
	size		An integer value constant that defines the number of dots in a user defined
			unit (UN).
			When used to compute the position of a graphic, the result is rounded to
			the nearest dot.
Default		No default
		OUTPUT XSHIFT
		Specifies whether or not the image of the form and data on a
		page is to be shifted downward or upward (thus changing the x
		coordinate of the logical page origin) and if so, by what values.
		XSHIFT is used to shift the image of the data downward or
		upward (as a long edge feed page is viewed in portrait
		orientation) to accommodate predrilled stocks, binding, finishing,
		edgemarking, and short-edge binding.
Syntax		OUTPUT XSHIFT = {YES NO value}

Options

Table 4-81. OUTPUT XSHIFT parameter options and definitions

Option	Definition
YES	Specifies that the page image will be shifted up or down.
NO	Specifies that no X-image shift will occur.
value	An integer that specifies a shift amount on the front and back sides of a page.
	The shift is upward on a portrait oriented page when a positive value is
	specified, and downward when a negative value is specified. (Each dot is 1/300
	of an inch.)
	The allowable range is 80 to –80.
Default	No default

4-90 Using LCDS Print Description Language