Xerox FreeFlow manual T4 Tcode DEFAULT=EBCDIC, Volume command parameters

Specifying input parameters

Example 4 The basic character set is EBCDIC. The editor that was used to edit the JSL file is limited to uppercase only:

T4: TCODE DEFAULT=EBCDIC,

TASSIGN=(3,('A',–,'I'),('J',–,'R'),('S',–,'Z')),

TASSIGN=(4,('#A',–,'#I'),('#J',–,'#R'),('#S',–,'#Z'));

VOLUME command

The VOLUME command specifies input medium and data characteristics.

VOLUME command parameters

The following table summarizes the parameters of the VOLUME command.

Table 2-56. Summary of VOLUME command parameters

Parameter	Specifies	Online	Offline	DJDE
VOLUME BMULT	Specifies a multiplication factor that is used to	N	Y	N
	determine the true block length.
VOLUME CODE	Specifies the character code set for input data	Y	Y	N
	translation.
VOLUME DBCODE	Specifies which double-byte character code	Y	N	N
	translation table the system will use to
	interpret the input data.
VOLUME DBCS	Specifies the double-byte character printing	Y	N	N
	mode. Allows printing of data streams with
	intermixed single-byte and double-byte
	characters.
VOLUME EMTYPE	Specifies the emulation type with which the	Y	N	N
	system will print text.
VOLUME EOV	Specifies the action that the system will take	N	Y	N
	when it detects the end of a tape volume.
VOLUME EXPAGE	Provides data error logging and reporting of	Y	N	N
	unprintable characters that do not have font
	bitmap or outline data in the font file.
VOLUME HOST	Specifies the source of input data that will be	Y	Y	N
	processed.

2-54 Using LCDS Print Description Language