Xerox FreeFlow manual Options 72. Output Shift parameter options and definitions

Specifying print format parameters

Options

Table 4-72. OUTPUT SHIFT parameter options and definitions

	Option	Definition
	v1	value 1.
		An integer value in dots for the amount of shift on the simplex page or the odd
		(front) side of the duplex page. (Each dot is 1/300 of an inch.)
		The range for v1 is –75 to 75.
	v2	value 2.
		A value in dots for the amount of shift on the even (back) side of a duplex page.
		The range for v2 is –75 to 75.
	YES	Specifies that a shift occurs. A standard size shift occurs if YES is specified
		(v1=75 and v2= –75).
	NO	Specifies that no shift occurs (v1=0 and v2=0).
	Default		NO
OUTPUT SHIFT			• If the origin of a print line is off the page, the printer prints as
parameter: points			much of the line as possible and provides a message, once
	to note		per report, indicating that printing is off the page.
			• Graphics and logos are not allowed to start off the page. If
			they are positioned at a point that is outside the page
			boundary, an error message is displayed.
			OUTPUT SIZING
			Specifies how the system matches the paper sizes in the output
			bins and how it responds to paper and bin size mismatches.
			When a stock has more than one tray assignment, and these
			trays contain different size paper, the system tries to match the
			paper sizes in the trays. You can specify one of the following
			options based on whether or not the printer will be attended by
			an operator during printing.

Syntax OUTPUT SIZING = {SEMIAUTO STOP BEST EXACT}

Using LCDS Print Description Language 4-79