Xerox FreeFlow manual Options 54. Tcode Tassign parameter options and definitions, Tcode Treset

Specifying input parameters

Options

Table 2-54. TCODE TASSIGN parameter options and definitions

Option	Definition
typespec	A typespec may be coded as a single integer, n. When coded as a single
	integer, the value must be in the range of 0 to 7. When coded as a series of
	integers, the values must be within the range of 1 through 7.
	NUMERIC may be used instead of 1; ALPHA may be used instead of 2.
inputspec	An inputspec may be coded as a single character, char, as a series of
	characters, (char [,...]), or as a range of characters, (char1, – , char2). The
	syntax char1, , char2 means the set of input codes corresponding to characters
	bounded by and including char1 and char2. (Refer to Appendix D, “Offline
	Specifications,” for relative order of characters.)

TCODE TASSIGN When a typespec is coded as a 0, all characters specified by an parameter: point inputspec are disassociated from all type code assignments.

to note Thus, the TASSIGN parameter may untype a specified set of characters.

When a typespec is coded with a single value (ranging from 1 through 7), all specified characters are associated with that type code. When a typespec is coded as a series of values (all ranging from 1 through 7), the specified characters are each associated with all of the specified types.

Default No default

TCODE TRESET

Disassociates one or more characters (or all characters) in a set from one or more types.

Syntax ac: TCODE TRESET = {(typespec, ’inputspec’) (typespec, (’inputspec1’ [, ’inputspec2’] [,...])) ALL}

2-52 Using LCDS Print Description Language