Xerox FreeFlow manual Options 59. Output Image parameter options and definitions

Specifying print format parameters

OUTPUT IMAGE

This parameter is for Batch mode processing only, and specifies the initial graphic imaging parameters to be used.

Syntax OUTPUT IMAGE = (vpos [units], hpos [units] [, n [/d]] [, (INKS, inkref1 [, inkref2])])

Options

Table 4-59. OUTPUT IMAGE parameter options and definitions

Option	Definition
vpos	vertical position.
	Specifies the vertical position of the top edge of the graphic, as a
	downward offset, relative to 0,0 on the current physical page (the position
	that would be specified by a PDE BEGIN of 0,0). This parameter is
	specified as a decimal number with up to three digits to the right of the
	decimal point and may be followed by a space and the units indicator.
hpos	horizontal position.
	Specifies the horizontal position of the left edge of the graphic, as a
	rightward offset, relative to 0,0 on the current physical page. The form of
	the specification is the same as for vpos.
units	Specifies the unit of measure for the vertical and horizontal positions of
	the image on the page.
	•	DOTS
	•	CM (centimeters)
	•	IN (inches)
	• UN (user defined unit).
	The default unit is IN.
n / d	numerator / denominator.
	Specifies the reference scale factor. Each parameter, n and d, must be an
	integer in the range of 1 to 8, thereby allowing a reference scale factor in
	the range of 1/8 to 8.
	The reference scale factor is multiplied by the scale factor specified at the
	time the graphic was digitized and the product is rounded to the nearest
	integer in the range 1 to 8. That integer becomes the effective scale factor
	with which each pixel of the graphic is imaged.
	If n is specified but not d, d is assumed to be 1.
INKS	Specifies that the ink references that follow will override the inks that were
	defined in the image file.
inkref	ink reference
	Specifies the inks that override the corresponding inks specified in the ink
	list of the image file.

4-60 Using LCDS Print Description Language