Xerox FreeFlow manual Options 66. Volume Kcode parameter options and definitions, Syntax

Specifying input parameters

VOLUME KCODE

Specifies which double-byte character code translation table the system will use to interpret the input data.

Syntax VOLUME KCODE = {keyword id }

Options

Table 2-66. VOLUME KCODE parameter options and definitions

Option Definition

keyword Specifies a specific, standard, system defined double-byte code translation table. The available options are:

•IBM: IBM Nihongo character set (Kanji double-byte character sets)

•IBMCHN: IBM 5550 code translation table

•JEF: Fujitsu JEF Kanji double-byte character set

•KEIS: Hitachi KEIS Kanji double-byte character set

•UCS2: ISO/IEC 10646 UCS2 character set

•USER: Refers to the single unlabeled KCODE command defined within the JDL or JDE.

id	Specifies an identifier label that was used in a previously defined KCODE
	command to refer to a specific, user-defined code translation table. The id label
	is required when multiple KCODE commands are contained within the JDL.
Default		No default
		VOLUME LABEL
		Specifies the type of label on the input tape.
Syntax		VOLUME LABEL = label type

Options

Table 2-67. VOLUME LABEL parameter options and definitions

Option Definition

label-typeSpecifies the type of label that the tape contains. The following types may be specified:

•COBOL (Honeywell 2000 COBOL tape with 120-byte labels)

•NONE (the input tape is unlabeled)

•ANSI/XEROX ANSI

•SPR (Honeywell 2000 System Print Tape)

•STANDARD

•UNDEF (Input tape label is not defined)

Using LCDS Print Description Language 2-63