Xerox FreeFlow manual Line VFU parameter options and definitions, Control of Print and Space

Specifying print format parameters

LINE PCCTYPE	• For the FreeFlow Print Server LCDS systems, this parameter
parameter: points	is treated as if the system were an IBM 3211.

to note	Note that there is no functional difference between IBM3211
	and IBM4245 for PCC types.
	• Creation of a user defined PCC table, which may be
	referenced by either an identifier id or the keyword USER, is
	specified using the PCC command. Refer to “PCC command”
	section of the “Specifying input parameters” chapter.
	• The INITIAL parameter for any of the PCCTYPEs listed in the
	previous table (except ANSI or HOST=RSX11) is TOF.
	For ANSI or HOST=RSX11, the INITIAL parameter is BOF.
	For USER or PCCid, the INITIAL parameter is set by the user
	in the PCC command.
	• The PCCTYPE=IBM3211 or IBM4245 specifies that the
	printer online interface will perform checks, such as for bad or
	NO OP parameters.
	LINE VFU
	Specifies a vertical format unit (VFU) table.
Syntax LINE VFU = {vfuid NONE}

Options

	Table 4-38. LINE VFU parameter options and definitions
Option		Definition
vfuid		vertical format unit identifier.
		The command identifier of the VFU table, which must precede this reference to
		it. The VFU table defines print line positions corresponding to skip to channel
		parameters for the job to be processed.
NONE		Indicates that any skip to channel parameter is to be replaced by a carriage
		control of Print and Space 1.

Default NONE

4-36 Using LCDS Print Description Language