Xerox FreeFlow Default BIN, Output Duplex, Output Faceup, Capacity of the sample tray 100 sheets

Specifying print format parameters

Options

Table 4-50. OUTPUT DESTINATION parameter options and definitions

Option	Definition
BIN	Specifies that the currently selected bin is used.
TRAY	Sends output to the sample tray.
	Transparencies should always be sent to this tray.
	NOTE: Use caution when selecting the TRAY option because of the limited
	capacity of the sample tray (100 sheets).
EXPORT	Specifies that sheets be sent to the bypass transport to be fed into a finishing
	device. The EXPORT option takes effect only if:
	• The user interface Output window has “System Specified” selected in the
	Output Location field, and
	• The Finishing field displays the name of a finishing device.

Default BIN

OUTPUT DUPLEX

Specifies whether printing is to occur in duplex (print on both sides of a sheet) or simplex (print on a single side).

Syntax OUTPUT DUPLEX = {YES NO}

Options

Table 4-51. OUTPUT DUPLEX parameter options and definitions

	Option		Definition
	YES		Specifies two sided (duplex) printing.
	NO		Specifies single sided (simplex) printing.
Default		NO
OUTPUT DUPLEX		Transparencies cannot print in duplex.
parameter: point		OUTPUT FACEUP
to note
		Specifies that printed pages are delivered face up to the output
		destination.
Syntax		OUTPUT FACEUP = {YES NO}

Using LCDS Print Description Language 4-53