Xerox FreeFlow manual JDE JDL DUPLEX=NO Feed

Using Dynamic Job Descriptor Entries (DJDEs)

•JDE

•JDL

•DUPLEX=NO

•FEED

Effect of multiple If you use multiple PDE BEGIN commands to define multiple logical pages logical pages on one physical page (as described in the PDE

command description in the “Specifying print format parameters” chapter), consider the following:

•With the exception of DEPT and SHIFT, all page oriented DJDEs are applied at a logical page boundary.

•The following DJDEs cause the current page position to be set to the first logical page of the front side of a new physical sheet:

–DUPLEX

–COPIES

–JDL

–JDE

–OTEXT

–RTEXT

–FEED

•The following DJDEs cause the current page position to be set to the first logical page of the next physical side:

–FORMS

–FORMAT

–BEGIN

–PMODE

–FONTS

Header pages and If an online job has header pages only (no trailers), DJDEs that online DJDEs are invoked within a report remain in effect for the first header

page of the following report; however, they do not remain in effect beyond the end of that header page. These conditions occur because the end of the first report is not detected until the first header page of the following report is received and processed.

Using LCDS Print Description Language 5-9