Logo Djde points to note, LPI Djde | Xerox FreeFlow instruction

Using Dynamic Job Descriptor Entries (DJDEs)

LOGO DJDE: points to note

•Any logos specified in a selected JDE (the JDE that was specified in the JDE DJDE) replace those from the original JDE. If none are specified in the selected JDE, logos from the original JDE are canceled.

•If the logo that is specified in the Initial JDE is not found, the job aborts and an error message is displayed. If a logo that is specified after the start of the job is not found, the system response is determined by the specifications in the ABNORMAL ERROR parameter.

•The HERE keyword must be included whenever the VADJ or HADJ options are coded. Otherwise, a syntax error occurs.

•If inks are used:

–If one inkref in the list is omitted, commas must be used as place holders to maintain the relative positioning of the remaining ink references.

–If more than two ink references are specified, the additional ink references are ignored.

LPI DJDE

Specifies the values for the vertical spacing between subsequent lines.

Type Record oriented

Syntax LPI = {(linespacing [units], DEFAULT) (linespacing [units], lineno, (...))}

Options

		Table 5-42. LPI DJDE options and definitions

Option	Definition


linespacing	lines per inch
	Specifies the line spacing value. May be measured in:

units	Unit of measure for the amount of vertical line space. The options are:
	• LPI (lines per inch)
	•	DOTS
	•	XDOTS (600 dpi)
	The default unit is LPI.

5-52	Using LCDS Print Description Language

Page 406

Image 406

Contents

Using Lcds Page Table of contents Specifying input parameters Page Page Using logical processing Page Specifying print format parameters Page Using Dynamic Job Descriptor Entries DJDEs Page Gdata Djde Graphic Djde Using PDL commands for graphics Using Lcds Print Description Language Table of contents Xvi Using Lcds Print Description Language Laser safety Ozone information U. S. only Operation safety U. S Operation safety Europe Electrical supply Operator accessible areas Ventilation Before cleaning your product MaintenanceCE mark Europe only For further information Contents Introduction Conventions Line DATA=1,132, FONTINDEX=133 Introduction Xxvi Using Lcds Print Description Language PDL principles and procedures Enabling PDL features and functions Command lines PDL command structure and componentsComponents of a command Set of typical PDL commands VFU1 ASSIGN= TOF= BOF= CME4 LINE= POSITION= FONT= END VFU1 VFUCME4 CME Keywords Value constants Variable referencesExample String constants T1 Table CONSTANT=3 Using the # character case toggleUsing a repeat count T1 Table CONSTANT= Iden PREFIX=X414243444546 Iden PREFIX=XC1C2C3C4Iden PREFIX=AABC!44EF Ascii Iden PREFIX=EABC!C4EFG Iden PREFIX=DJDECONSTANT=ABCDE Record Block Constant = H6’373737’ Incorrect structure for FreeFlow Print Server Lcds systems Command syntaxSyntax rules Valid structure for FreeFlow Print Server Lcds systems OTEXT=sc ,passnumEND,WAITNONE END ENDCriteria CONSTANT=0,120,EQ,T1 OTEXT=‘load blue paper’, Wait Syntax conventions Command syntax conventionsLine Output Sample PDL commands PDL command categories Job Source Library JSL JSL command levels What does a JSL specify? Other commands in the JSL can reference them. Commands with Command levels and their general purposeJobs and catalogs within the JSL Sample JSL file format JDL name JDL or system level commandsCoding system level commands with identifiers Jdlsef JDL Xsml JDL CONSTANT=PAGE VFU2VFU3 CONSTANT=JOB Coding other system level commands Tables Line DATA=1,132, PCCTYPE=IBM3211 PCC=0,NOTRAN, VFU=VFU1 Volume HOST=IBMONL, CODE=EBCDIC Record LENGTH=136Specifying Acct command parameters Acct USER=TRAY JOB1 JDE INCLUDE=POWER Catalog level commandsPower Catalog Job or JDE level commands JOB2 JDE JOB3 JDE Coding job or JDE level commandsJOB4 JDE Line VFU=VFU2 Output FORMS=AY2F Examples Job level commandsMessage OTEXT= ALL Forms Duplex ONLY!!!, 1, Wait PURGE=NO Comments System commands are coded hereEnding a JSL What may follow the END command Nested comment VFU2UP Sample completed JSLXrxspl JDL FONTS=P1012A, PMODE=PORTRAIT DATA=1,132, PCCTYPE=IBM3211 Before creating a JSL considerations and decisions Output specifications Input data Special features Interactions between JSLs, catalogs, and jobs Paper sizes and page frames Orientation Vertical and horizontal positions in portrait mode Layout for FMT6 Impact printer format, 8.1 lines per inch Page Fixed pitch and proportional font character Spacing Overriding PDL commands Command override sequence Print Services window with Queue Manager Selected Page PDL principles and procedures Example PDE1 BEGIN=175 DOTS, 00 Xdots Sample JSLJdlhlc JDL IDR1 ILIST=’RED’,’BLACK’,’PINK’ Hints and tips Criteria Smplst JDL VFUCONSTANT= CONSTANT=2,132,EQ,T1 Coding a JSL Short JSL coding procedure Before you start Workspace and Programs menus 10. Text Editor window 11. Text Editor Include a File window Opt/XRXnps/resources/lcds Var/spool/XRXnps/resources/lcds 12. Save As window Recommended Full JSL coding procedure 13. Workspace and Programs menus 14. Text Editor window Recommended JDE INCLUDE=CATPOW 16. Text Editor Save As window Sample online JSL 10. Sample online JSL Trlp JOB Banner TEST=C2, HCOUNT=0, TCOUNT=3 CONSTANT=// JOBHdrp JOB Banner TEST=C1, HCOUNT=2, TCOUNT=0 Both JOB Sample offline JSL 11. Sample offline JSL LTHFLD=2, FORMAT=BIN, OFFSET=0 IDR=IDR1, NUMBER=1,1,0,1,’BLACK’ Compiling procedure Compiling a JSL 18. Selecting Tools from the Workspace menu 19. Terminal window with % prompt displayed 12. xjdc command options = / foldername1 / foldername2 Files produced by the compilation procedure Opt/XRXnps/XRXxjdc/data Correcting errors in a JSL JSL Contains Errors 21. Text Editor Open a File window Opt/XRXnps/resources/lcds 22. a .LST file for a JSL containing errors Benefits of using DJDEs Dynamic job descriptor entries DJDEs Online dump Online dump format and contentDumps Starting and ending online dump sessions 13. Print format command usage for online dump Restrictions for online dumps Offline dump Offline dump format and contentStarting and ending tape dump sessions Page 14. Software version compatibility DP92C 15. Highlight color commands Number IresultLogo XMP Points to note for colored forms Other Xerox monochrome LPS jobsPage Specifying input parameters Input data streams Input processing functions Input processing online Using Downloading resource files from the host to the printer Default channel assignments made at installation IBM MASK=?, CONSTANT=HE?DE? Example of an online JSLOnline JDL VFU1 CONSTANT=’TRAILER PAGE’ CONSTANT=’//JOB’ CONSTANT=’EOJ’Dflt JOB Input processing offline Host computer tape formats Packed data formats Tape codesRecord formats Multivolume processing Record structure Input processing command descriptions Summary of PDL commands associated with input Processing Block command parameters Block commandSummary of Block command parameters Default Block AdjustBlock Constant Block Length Block FormatOptions Block Format parameter options and definitions Options Block Length parameter options and definitions Block Lthfld Block LmultOptions Block Lmult parameter options and definitions Options 10. Block Lthfld parameter options and definitions Syntax Point to noteBlock Offset Options 11. Block Offset parameter options and definitions Block Preamble Default noBlock Postamble parameter points to note Block Zero Block command example Block command points to noteBlock LENGTH=351, OFFSET=2 ADJUST=0 LTHFLD=2, PREAMBLE=8 Code Default Code command parameters15. Summary of Code command parameters Code Assign Code Assign Code DefaultOptions 16. Code Assign parameter options and definitions Parameter Options 17. Code Default parameter options and definitionsTo note Examples Dbcode command CODE2 Code DEFAULT=EBCDICDefault Code Spacecode parameter point to note ASSIGN=X5A,X40,X40 ’40’ Dbcode Assign Dbcode command parameters19. Summary of Dbcode command parameters Options 20. Dbcode Assign parameter options and definitions Dbcode command point to note Dbcode DefaultIden command Iden Djpcc Default DefaultOptions 23. Iden Djpcc options and definitions Iden Oprinfo Iden OffsetOptions 24. Iden Offset parameter option and definition Options 25. Iden Oprinfo options and definitions Options 27. Iden Skip parameter options and definitions Iden PrefixOptions 26. Iden Prefix parameter options and definitions String constant Kcode command parameters Iden command exampleKcode command 28. Summary of Kcode command parameters Kcode Assign Kcode DefaultOptions 30. Kcode Default parameter options and definitions Options 29. Kcode Assign parameter options and definitions PCC command parameters Kcode command point to notePCC command 31. Summary of PCC command parameters Options 32. PCC Advtape parameter options and definitions PCC AdvtapePCC Assign Ccln Carriage control line number Syntax for ccln definitionOptions 33. PCC Assign parameter options and definitions Field PCC Assign parameter points to note PCC DefaultOptions 34. PCC Default parameter options and definitions ASSIGN=X’60’, SP1, ASSIGN=X’61’, SP2, ASSIGN=X’62’, SP3 PCC Initial Default TOFOptions 35. PCC Initial parameter options and definitions PCC Mask Default X’FF’ PCC command points to notePCC command example Options 36. PCC Mask parameter options and definitions 37. Summary of Record command parameters Record commandRecord command parameters Record Adjust Record Constant Options 38. Record Adjust parameter options and definitionsFrom 1 to 4 bytes Options 41. Record Length parameter options Definitions OptionsDefinitions Parameter points Record Lthfld Record LmultOptions 42. Record Lmult parameter options and definitions Options 43. Record Lthfld parameter options and definitions Record Postamble Record OffsetOptions 44. Record Offset parameter options and definitions Record Preamble LTHFLD, OFFSET, FORMAT, and Preamble parameters Default Record command Points to noteRecord Structure Constant and Structure parameters Record command example Using online JDEs in offline JDLsLine Data parameter and Record Length parameter Record format types Seffnt command Seffnt Sefmap Seffnt command parameters48. Summary of Seffnt command parameters Options 49. Seffnt Sefmap parameter options and definitions Seffnt MAP REP Replace Seffnt command points to note Options 50. Seffnt MAP parameter options and definitions Seffnt command examples Tcode command General rules for using the Tcode command JOB4 JOB Seffnt SEFMAP=L01BOB,P0812A 52. Summary of Tcode command parameters Tcode command parameters51. Specifying various types of character sets Default Tcode Default parameter points to note Tcode DefaultOptions 53. Tcode Default parameter options and definitions Tcode Tassign Tcode Treset Options 54. Tcode Tassign parameter options and definitions Options 55. Tcode Treset parameter options and definitions Tcode command examples Volume command parameters T4 Tcode DEFAULT=EBCDICVolume command 56. Summary of Volume command parameters Volume Label Volume KanjiVolume Kcode Volume Lcode Volume Code Volume BmultOptions 57. Volume Bmult parameter options and definitions Options 58. Volume Code parameter options and definitions Volume Dbcode Default Volume Code parameter points to noteOptions 59. Volume Dbcode parameter options and definitions Volume Emtype Volume DbcsOptions 60. Volume Dbcs parameter options and definitions Options 61. Volume Emtype parameter options and definitions Options 62. Volume EOV parameter options and definitions Volume EOVVolume Expage Volume Host Options 63. Volume Expage parameter options and definitionsDefault YES Options 64. Volume Host parameter options Definitions Record Length = Line Default Volume Host parameter points to noteDouble-byte printing Volume Kanji Options 65. Volume Kanji parameter options and definitions Options 67. Volume Label parameter options and definitions Volume KcodeOptions 66. Volume Kcode parameter options and definitions Syntax Default Ebcdic Volume LcodeOptions 68. Volume Lcode parameter options and definitions Volume Lpack Volume Minlab Options 69. Volume Lpack parameter options and definitionsVolume Maxlab Options 70. Maxlab parameter options and definitions Volume Optimize Options 71. Volume Minlab parameter options and definitionsNccheck Volume Oshdp Volume OschnOptions 73. Volume Oschn parameter options and definitions Options 74. Volume Oshdp parameter options Definitions Options 76. Volume Rmult parameter options and definitions Options 75. Volume Ostlp parameter options DefinitionsVolume Rmult Volume Tcode Options 78. Volume Unpack parameter options and definitions Options 77. Volume Tcode parameter options and definitionsVolume Unpack Default None Options 79. Volume Vcode parameter options and definitions Volume Vcode80. Character Type code options Volume HOST=IBMONL, CODE=EBCDIC Default Volume Vcode examplesVolume command examples 81. Unique character code types Offline Using logical processing Types of commands for logical processing Test expressions Coding a test expression Tabid Command-keywordT1 Table Criid Logical processing commands that have Test parameters Commands that define criteria and constantsTable command Table Constant Table command parametersSummary of Table command parameters Options Table Constant parameter options and definitions Table Mask Options Table Mask parameter options and definitions CONSTANT=$$ Table command points to noteTable command examples CONSTANT=120 Mask associations of character to type for the Table Command T2 Table Criteria command modes Criteria commandCharacter to type associations Test = criid Using the Criteria commandTest = criid1, AND, criid2 Test = criid1, OR, criid2 Rselect TEST=C1 C1 Criteria Constant =offset,length,EQ,T1String comparisons Using logical processing Masked comparisons using nondefault type assignments Commands that specify string comparisons Summary of Criteria command parameters Criteria command parametersCriteria Change Options Criteria Change parameter options and definitions Not done and the test fails Change parameter syntax example Syntax CriteriaCriteria Constant Constant parameter syntax example Syntax Options Criteria Constant parameter options and definitionsCriteria Linenum Initial line Criteria ValueCount Tabid Table identifier Page Parameter syntax Example Logical processing command descriptions Banner command 13. Summary of Banner command parameters Banner command parametersBanner Hcount Options 15. Banner Hjobno parameter options and definitions Options 14. Banner Hcount parameter options and definitionsBanner Hjobno Banner Hrptna Option 17. Banner Tcount parameter option and definition Options 16. Banner Hrptna parameter options and definitionsBanner Tcount Banner Test Options 19. Banner Type parameter options and definitions Default BannerOptions 18. Banner Test parameter options and definitions Data Banner command examples Banner command points to noteC1 Criteria C2 Criteria Bselect and Bdelete commandsBselect and Bdelete Test parameter 21. Test parameter options and definitions Bselect and Bdelete commands points to noteC1 Criteria CONSTANT=0,1,EQ,T1 Bselect TEST=C1 Sample Bselect and Bdelete command Usage Example C1 Criteria CONSTANT=4,4,EQ,T1 Bdelete TEST=C1 22. Summary of Lmodify command parameters Lmodify commandLmodify command parameters Lmodify INK Options 25. Lmodify Test parameter options and definitions Lmodify SelectLmodify Test Line Points to note Lmodify command Raux command Raux Test parameter Raux command points to noteRaux command example Options 26. Raux Test parameter options and definitions Rdelete and Rselect commands Rselect and Rdelete Test parameter T1 Table CONSTANT=EFGH C1 Criteria Rdelete and Rselect commands point to noteRdelete command example Rdelete TEST=C1 Rfeed command Rfeed Test parameter Rfeed command points to note 28. Rfeed Test parameter options and definitions Rfeed Roffset commandCONSTANT= 15,3,EQ,T3 Green Default ALL Roffset command parameters29. Summary of Roffset command parameters Roffset Passes Roffset Test Roffset command points to noteOptions 31. Roffset Test parameter options and definitions T1 Table CONSTANT=PAGE...1 C1 Criteria Roffset command exampleRoffset TEST=C1, PASSES=ALL 32. Summary of Rpage command parameters Rpage commandRpage command parameters Rpage Side Options 33. Rpage Side parameter options and definitions Rpage Test Options 35. Rpage When parameter options and definitionsDefault TOP Options 34. Rpage Test parameter options and definitions Rpage command points to note Rpage command examples Effects of Rpage Side parameter Effects of Rpage When parameter 36. Summary of Rsuspend and Rresume command parameters Rresume and Rsuspend commandsRsuspend and Rresume command parameters Rsuspend and Rresume Begin Current Rresume and Rsuspend commands points to noteRsuspend and Rresume Test Next Interaction with Rstack Rresume Rsuspend and Rresume exampleBEGIN=CURRENT Option Catal Assign SYSRLB,3340,TEMP Rstack command Rstack delimiter modes Delimiter on accounting Status display 39. Summary of Rstack command parameters Rstack command parametersRstack Acctinfo Rstack Delimiter Rstack Hrptna Rstack Print Default Rstack Print parameter points to noteOptions 42. Rstack Hrptna parameter options and definitions Options 43. Rstack Print parameter options and definitions 44. Test parameter options and definitions Rstack command points to noteRstack Test Points to note for online printing ACCTINFO=14,19 Rstack command exampleHRPTNA=20,10 Sample Rstack command usage illustration Print format command descriptions Summary of print format commands Summary of Abnormal command parameters Abnormal commandAbnormal command parameters Abnormal Acctfeed Abnormal Error Abnormal Code Error Options Abnormal Error parameter options and definitionsAbnormal Default Stop Abnormal ImismatchPage Options Abnormal Isubstitute parameter options Definitions Default ANYAbnormal Isubstitute Abnormal Otext Abnormal REP Default Abnormal Otext parameter exampleOptions Abnormal Otext parameter options and definitions Options Abnormal REP parameter options and definitions Security Abnormal SecurityJDL 11. Summary of Acct command parameter Acct commandAcct command parameters Acct Dept Acct User Default BIN Acct command points to noteAcct command example Options 13. Acct User parameter options and definitions L47 CME commandCME12.CME L49 P10, C’ABCD’ CME command parameters 14. Summary of the CME command parameters CME Font CME ConstantOptions 15. CME Constant parameter options and definitions Option 16. CME Font parameter option and definition CME INK Parameter pointsXYZ CME Option 17. CME INK parameter option and definition CME1 CME CME LineOptions 18. CME Line parameter options and definitions Line =2,3, POS=15 CME Position Default CME command points to noteOptions 19. CME Position parameter option and definition Position Copy sensitive CMEs CME command examples IDR command IDR File will be Used During Printing IDR Icatalog IDR command parameters20. Summary of IDR command parameters Options 21. IDR Icatalog parameter options and definitions Options 22. IDR Ilist parameter options and definitions Default IDR Ilist parameter points to noteIDR Ilist Dfidr IDR Ilist = ‘BLACK‘ 24. Summary of Line command parameters Line commandLine command parameters IDR Palette Line Baseline Options 25. Line Baseline parameter options and definitions Default NospaceLine Blanktype 27. Line Data parameter options and definitions Default ProcessLine Data Line FCB If online, a single terminating byte exists Line FdataOptions 29. Line Fdata parameter options and definitions If offline, no terminating byte exists Line Fontindex Specifies that there is no font index Line Fontindex parameter points to note Syntax Line Gdata Line Inkindex Default offsetOptions 31. Line Gdata parameter options and definitions Options 32. Line Inkindex parameter options and definitions INKINDEX=143 ParameterDATA=1,132, FONTINDEX=133 Line LPI Line Margin Default Line LPI parameter points to note Syntax OptionsLine LPI = Linespacing 34. Line Margin parameter options and definitions Default Line Overprint parameter points to note Options 35. Line Overprint parameter options and definitions PCC=0,NOTRAN Line Overprint parameter exampleDATA=1,132, PCCTYPE=ANSI Line PCC Line Pcctype Options 37. Line Pcctype parameter options and definitions 38. Line VFU parameter options and definitions Line VFUControl of Print and Space Line command points to note DATA=1,132, PCC=0,NOTRAN Line command examplesVFU=V1, FONTINDEX=1 Message command Example 3 Line PCCTYPE=NONE, DATA=1,57, VFU=V1 Message Itext Message command parameters39. Summary of Message command parameters Options 40. Message Itext parameter options and definitions Options 41. Message Otext parameter options and definitions Message OtextEND Message command points to note Message command example Output command parameters Output command42. Summary of Output command parameters Output IDR Output IdfaultOutput Graphics Output Image 43. Bform parameter options and definitions Output BformNuvera MX systems Output Binding Default Long43. Bform parameter options and definitions Inkref Ink reference Specifying print format parameters Specifying print format parameters Collate parameter points to note Output CollateOutput Output Copies Options 47. Output Cover parameter options and definitions Output CoverOutput Cycleforms Parameter Example CycleformsOutput CYCLEFORMS=form1, form2 Formid FIX Output DensityOutput Destination Nofix Options 51. Output Duplex parameter options and definitions Default BINOutput Duplex Output Faceup Options 53. Output Feed parameter options and definitions Options 52. Output Faceup parameter options DefinitionsOutput Feed ‘stockname’ Output Format Default FMT1Options 54. Output Format parameter options and definitions Output Forms Options 55. Output Forms parameter options and definitions FORM12,1,2 Cycleforms and Forms parameters Both may beOutput Forms Forms FORM4, Copies Output Graphics parameter examples Default Output Graphics parameter points to noteOutput Idfault Move Options 58. Output IDR parameter options and definitions Output Idfault Output IDFAULT=’RED’ parameterOutput IDR Output IDR Output IDR=IDR1 parameter Output Image Options 59. Output Image parameter options and definitions Output Invert Output GRAPHIC=BATCH, IMAGE=1 IN,2 CMOptions 60. Output Invert parameter options Definitions Output Iresult Default Output Iresult parameter points to note60. Output Invert parameter options Definitions Black Xdots 600 dpi dots Output LogoOptions 62. Output Logo parameter options and definitions Logo Options 63. Output Modify parameter options and definitions Output ModifySpecifies that data are processed without modification Output NTO1 Options 64. Output NTO1 parameter options and definitions Number Output Number Options 65. Output Number parameter options and definitions 65. Output Number parameter options and definitions Output Offset = ALL First None Number character string is placed on the page atOutput Offset Options 66. Output Offset parameter options Definitions Output Ostk Where ostkspec is67. Output Ostk parameter options and definitions Defaults 67. Output Ostk parameter options and definitionsPage Output FEED=regular stock, DUPLEX=NO or DUPLEX=YES Page Output Papersize Default Output Papersize parameter points to noteWhat to do Uslegal Output Papersize parameter example Output Purge Options 69. Output Purge parameter options and definitions Output SF1FUNCTION Output SF2FUNCTION Output Shift Options 72. Output Shift parameter options and definitions Semiauto Default Output Sizing parameter points to noteOptions 73. Output Sizing parameter options and definitions Best Output Staple Options 74. Output Staple parameter options and definitions Output Stocks Default No defaultOptions 75. Output Stocks parameter options and definitions Output Sysppr Options 76. Output Sysppr parameter options Definitions Sysppr and the Stockset Syspage parameter Output Tmode Default Output Tmode parameter points to noteInches is the default widthunit Options 77. Output Tmode parameter options and definitions Pitch modes and throughput performance The printing Pitch Dots Xdots PPMPage Page DP 100/115/135/155/180 EPS only Transparencies cannot Output TransOutput Units Options 81. Output Xshift parameter options and definitions Options 80. Output Units parameter options and definitionsOutput Xshift Size Output command point to note Output command examples Illustration of ways to use Output Offset Parameter Example Standard PDEs 82. Standard print formats PDEs 83. Summary of PDE command parameters PDE command parametersPDE Begin Options 84. PDE Begin parameter options and definitions PDE Begin Bform Copies Duplex JDE JDL Otext Rtext PDE Fonts Options 85. PDE Fonts parameter options and definitions Options 86. PDE Pmode parameter options and definitions PDE PmodeLandscape PDE1 PDE PMODE=LANDSCAPE, BEGIN=.861,.7 PDE command points to notePDE command examples PDE2 PDE PMODE=PORTRAIT, BEGIN=1.3,.37 Route command parameters Route command87. Summary of Route command parameters Route Rtext Route RformOptions 88. Route Rform parameter options and definitions Formid Form identifier Refer to the fontindex option in this table CommandOptions 89. Route Rtext parameter options and definitions Specifies that the text applies to all copies ROUTEF1 Route RTEXT=ROUTE1 Route command exampleStockset command Route RTEXT=‘USER1,1,33,64 RTEXT=USER2,2,33,64 Stockset Assign Stockset command parameters90. Summary of Stockset command parameters Example of use of Assign = ’F1302’, COVER,’F1415’, Body Stockset Inifeed Stockset Syspage Syspage StocksetPaper size mismatch on system pages Pages generated Example of mismatch handling F9999, Discon Stockset command exampleBills Stockset Assign = F1302, Cover Syspage = Coverend 94. Summary of VFU command parameters VFU commandVFU command parameters VFU Assign Options 96. VFU BOF parameter options and definitions Options 95. VFU Assign parameter options and definitionsVFU TOF VFU command points to note 97. VFU TOF parameter options and definitions ASSIGN=1,5 VFU command exampleV1 VFU ASSIGN=12,55, TOF=5, BOF=55Page Using the Iden command to enable DJDEs Iden PREFIX=RTEST, SKIP=9, OFFSET=3 OPRINFO=YES Specifying Djde records Iden PREFIX=EDJDE, SKIP=7, OFFSET=2 OPRINFO=YES Application of DJDEs Mtest FONTS=P0612A,P0812A Mtest ASSIGN=12,63, TOF=5, BOF=66 Mtest C MULTI-RECORD Djde ExampleMtest COPIES=20,COLLATE=YES, ASSIGN=1,5, ASSIGN=5,32 Iden PREFIX=MTEST, SKIP=7, OFFSET=1 OPRINFO=YES Djde operator information pages Missing END command or page boundary. The followingMissing END Command or Missing page Boundary Messages on JDE Djde Restrictions on job parameter modificationParameters that cannot be changed through a Parameters that are not changeable by a JDE Djde Abnormal Acct Parameters that are changeable by a JDE DjdeDjde Rdelete Record Length Rfeed Roffset Considerations and cautions for using DJDEs Solution JDE JDL DUPLEX=NO Feed Types of DJDEs Carriage control parameter Processing with Djde Oriented DJDEs Accounting log. You can print out the values MAP ItextJDE Margin File Record oriented DJDEsAssign LPI Record oriented DJDEs for graphics Djde descriptionsAlter Djde Examples of Alter Djde Options Alter Djde options and definitionsAlter Djde point to note UN user defined units Assign Djde points to note Assign DjdeAssign Djde options and definitions Batch Djde Begin Djde Options Batch Djde options and definitionsBatch Djde points to note Start Begin Djde points to note 10. Begin Djde options and definitionsBform Djde Init Initial copy Options 11. Bform Djde options and definitionsBform Djde points to note References Text Djde BOF DjdeBOF Djde points to note Syntax C text Options 13. C text Djde options and definitions Cancel DjdeOptions 14. Cancel Djde options and definitions Text Djde points to note Collate Djde point to note Collate DjdeOptions 15. Collate Djde options and definitions Copies Djde 17. Data Djde options and definitions Copies Djde points to noteData Djde Data Djde point to note 18. Dept Djde options and definitions Dept DjdeSyntax Dept = sc Options Dept Djde points to note Duplex Djde Options 19. Destination Djde options and definitionsDestination Djde points to note Options 20. Duplex Djde options and definitions EOF Djde END DjdeSyntax END END Djde points to note Syntax EOF EOF Djde point to note Options 21. Feed Djde options and definitions Feed DjdeFdata Djde File Djde Options 22. Gdata Djde options and definitions23. File Djde options and definitions FILE= 23. File Djde options and definitionsFile Djde points to note FILE=,,C or FILE=END,,C Card image file processing LPS labeled file processing Page Fontindex Djde 24. Fontindex Djde options and definitions Fontindex Djde points to note Fonts Djde 25. Fonts Djde options and definitions 25. Fonts Djde options and definitions Fonts Djde points to note 26. Format Djde options and definitions Format DjdeFormat Djde points to note 27. Forms Djde options and definitions Forms DjdeForms Djde point to note Options 28. Gdata Djde options and definitions Gdata DjdeGraphic Djde 29. Graphic Djde options and definitions Graphic Djde points to note Options 30. Icatalog Djde options and definitions Idfault DjdeIcatalog Djde Icatalog Djde example 32. IDR Djde options and definitions IDR DjdeIlist Djde Image Djde Options 33. Ilist Djde options and definitionsIlist Djde example 34. Image Djde options and definitions 34. Image Djde options and definitions Inkindex Djde 35. Inkindex Djde options and definitions Invert Djde Iresult Djde Systems, the default is BlackOptions 36. Invert Djde options and definitions Options 37. Iresult Djde options and definitions Itext Djde points to note Itext DjdeOptions 38. Itext Djde options and definitions Syntax JDE = JDEid JDE Djde points to note 39. JDE Djde options and definitionsJDL Djde Logo Djde JDL Djde points to note41. Logo Djde options and definitions 41. Logo Djde options and definitions LPI Djde Logo Djde points to note42. LPI Djde options and definitions MAP Djde 42. LPI Djde options and definitionsLPI Djde point to note Options 43. MAP Djde options and definitions Modify Djde Options 44. Margin Djde options and definitionsMargin Djde points to note Type Modify Djde points to note Number Djde 46. Number Djde options and definitions Number Djde point to note Using Dynamic Job Descriptor Entries DJDEs Otext Djde Number Djde exampleNUMBER=1,1,40,1, END Options 47. Otext Djde options and definitions 48. Overprint Djde options and definitions Otext Djde point to noteOverprint Djde Overprint lines is always printed on the accounting Palette Djde Overprint Djde points to noteOptions 49. Palette Djde options and definitions Options 50. Pmode Djde options and definitions Palette Djde examplePmode Djde Pmode Djde point to note Rtext Djde 51. Rform Djde options and definitionsRform Djde points to note Specifies that no form will be printed with Rtext pages RTEXT=’TEST’,ALL,15,5,2 52. Rtext Djde options and definitionsRtext Djde example Specifies that no text is to be printed on a separate Save Djde point to note Save Djde53. Save Djde options and definitions Sefmap Djde Sefmap Djde points to note Options 54. Sefmap Djde options and definitionsSefmap Djde examples SF1FUNCTION Djde SEFMAP=font1,font7, font5,font6,REPFont1,font7, font5,font6 Options 55. SF1FUNCTION Djde options and definitions Options 56. SF2FUNCTION Djde options and definitions SF2FUNCTION DjdeShift Djde Shift Djde points to note 57. Shift Djde options and definitionsSide Djde Side Djde points to note Options 58. Side Djde options and definitionsOffsetopt Stocks Djde point to note Stocks DjdeOptions 59. Stocks Djde options Definitions Tmode Djde Syntax TOF = value Options 60. Tmode Djde options and definitionsTOF Djde 61. TOF Djde options and definitions Options 62. Trans Djde options and definitions Trans DjdeTrans Djde points to note Options 63. XMP Djde options and definitions XMP DjdeReport Xshift Djde 64. Xshift Djde options and definitions Output command parameters and functions for graphics Djde definitions for graphics Input for graphics Error handling for graphics Graphic processing modes Formats for graphic data Page Random Move mode Graphics features restrictionsImpact of graphics on system performance Page Page Table A-1. Symbols used in command syntax Contents of command table columns Summary table of PDL commands and DJDEs Table A-2. PDL commands and DJDEs Name ‘inkref’’ Text Filename ‘inkref’ Jdlname All AcJOB AcIDRJdename All FreeFlow Print Server Lcds Systems Line Baseline Largest Fdata DefaultGdata Default Blanktype Nospace Message Itext None Ucsb ProcessVFU None Otext None Collate YES Density DefaultBinding Long Cover None Mod & pos =1 Width unit=IN All AcPDE No default for All except 9790 Stockdef 8790 LPSAcPCC 18 IN, .66 All First ‘stockname’ All AcVFU AcTCODEAll Record Oshdp Volume Optimize NoneOschn OstlpPage PDL command quick reference Table B-1. Symbols used in command syntax Acct User = BIN Tray Both None Alter Djde PDL command Quick Reference tableTable B-2. PDL command quick reference table Testexp Bdelete Block Zero = YES no Bselect Iden Offset = value OnlyFile = filename , filetype , f , s , n Only JDE = JDEname Only Lmodify Lmodify = Test Message Line FCB = Ignore ProcessLine Ucsb = Ignore Process Wait None Output Feed = stockreference ‘stockname’ Main AUX Inkref1 , inkref2Inkindex1 , inkindex2 Output Offset = ALL First None Output Purge = YES no Output Resolution = 300Output XMP = Default Report Output Papersize = A3 A4 B4 B5 Uslegal L0112B Rfeed Test = testexp, stockdef No default for StockdefAcPDE AcPDE Begin = vpos, hpos 18 IN, .66 Raux Test = testexp Rstack Print = BIN Both Tray None AcTABLE Mask = ignore chart ,charspeci1 , charspeci2Rstack Delimiter = YES no Rsuspend Rsuspend Begin = Current Next Volume Tcode = tcodetype tcodename Volume Vcode = translation type, keyword Character code assignments Table C-1. IBM BCD code set IBM BCD code setHoneywell/Bull 200 and 2000 BCD code set Table C-2. Honeywell/Bull 200 and 2000 BCD code set Table C-3. Honeywell/Bull 6000 BCD code set Honeywell/Bull 6000 BCD code setFieldata translation Table C-4. Fieldata translation Univac Ascii character set Table C-5. Univac Ascii character set Standard Ascii character set Table C-6. Standard Ascii character set Standard Ebcdic character set Table C-7. Standard Ebcdic character set Ebcdic most significant digit Page Input unpacking examples Figure D-1. Input unpacking examples Valid host computer and label specifications Table D-1. Valid host computer and label specifications RSX11 Stdout NEC NCR OldumpOswtr Octdump Xerox Host system JDLs on system software CD Table D-2. JDL source files on software CD LPS tape label format Figure D-2. LPS tape format diagram Table D-3. Content of tape records Table D-4. RAD-50 character set Offline specifications Using Lcds Print Description Language Glossary Page Ascii Page Page Page Program IPD IOMIOT IpfontsPage Page Page Page Page Page Page Page Index INDEX-2 Copies Djde Default ParameterDestination Djde Duplex Djde FCB IBM JSL INDEX-7 PCC PPI SEF Sefmap Djde INDEX-10 INDEX-11 Index INDEX-12

Xerox FreeFlow manual Logo Djde points to note, LPI Djde options and definitions

Models: FreeFlow

LOGO DJDE: points to note

LPI DJDE

Options

Table 5-42. LPI DJDE options and definitions

Option

DOTS

Using LCDS Print Description Language