Xerox FreeFlow manual Number Djde example, NUMBER=1,1,40,1, END, Otext Djde

Using Dynamic Job Descriptor Entries (DJDEs)

•The options for the NUMBER DJDE are the same as for the NUMBER parameter of the OUTPUT JSL command.

NUMBER DJDE example

NUMBER=(1,1,40,1), END;

OTEXT DJDE

	Specifies a text message to be output to the operator during job
	printing. It takes effect on the next page boundary.
Type	Page oriented
Syntax OTEXT = {(sc [, {passnum END}] [,WAIT]]) NONE}
	or
	OTEXT = sc
Options
	Table 5-47. OTEXT DJDE options and definitions
Option	Definition
NONE	Specifies that no text message is output to the operator during printing.
sc	String Constant.
	The text of the message that will be output to the operator.
	The message may have up to 80 characters, with a maximum of 400
	characters per report.
passnum	pass number.
	Specifies the number of the pass (copy ply) to which the text applies.
	Multiple sc messages, one per passnum, may be specified in a JSL. The
	message is output to the operator immediately before the next page on the
	specified report ply starts printing.
	If no pass number is specified, the text is output only once, when the page
	begins to print.
WAIT	Suspends printing after the message is output, until the operator has
	responded by selecting or pressing a Continue button.
END	Displays the message text after the last copy of the report is printed.

5-58 Using LCDS Print Description Language